Starting QDB


qdb [-A] [-c config_file] [-C policy] [-D]
    [-I test] [-n mountpoint] [-N control] [-o option[,option2...]]
    [-P permissions] [-R mode]
    [-r mode] [-s routine]
    [-t timeout] [-T max_timeout] [-vV] [-W time] [-X path]


Turn off exclusive mode: allow other applications to use the database files.
-c config_file
Specify a configuration file of databases and policies. See the Configuration File section below for more information.
-C policy
Specify a database connection sharing policy. The policy can be one of:

See the Sharing connections between clients section below for more information.

Disable shared cache. You should only use this option if you need to debug shared caching.
-I test
Perform a database integrity test at startup. The test can be one of:

See the Database integrity testing section below for more information.

-n mountpoint
The QDB resource manager mountpoint. By default this is /dev/qdb.
-N control
Name of the database control entry. By default this is .control.
-o option
Configure miscellaneous options. The options are:
-P permissions
Access permissions for the database and backup files. By default this is 0664.
-R mode
Set the database creation and recovery mode. The mode can be one of:

See the Database recovery section below for more information.

-r mode
Set the connection recovery mode. The mode specifies what happens when a database problem is discovered and corrected. It can be one of:
-s routine[@data]
Name special collation routines and data. This setting specifies a name (or wildcard pattern) of collation functions which expect the format of data that you will pass in via qdb_collation(). only those registered collation functions that match this pattern will get their setup function invoked (since the format of the data must be known to the function). By default, all functions have their startup functions invoked.

You can also use the -s option to set the initial setup data. For example, -s cldr@en_US would set the magic function name to “cldr”, and also invoke the setup function with the “en_US” string at startup.

-t timeout
Set the busy-wait timeout on database access, in milliseconds. By default, this is 5000 milliseconds. See the Busy timeout section below for more information.
-T max_timeout
Set the maximum busy-wait timeout on internal database access, in milliseconds. By default, this is 5000 milliseconds. See the Busy timeout section below for more information.
Increase output verbosity. Messages are written to sloginfo.
Replicate output messages to the console, as well as to sloginfo.
-W time
Used in conjunction with the -o profile option: log only SQL statements that take longer than time (specified in milliseconds). The default for time is 5000 milliseconds.
-X path
Set a script to run when the QDB encounters a corrupt database. See Handling corrupt databases below.

Database directory

The QDB database directory can be on any QNX or POSIX filesystem with read/write access (including memory-based filesystems, such as tmp-fs). QDB can run from QNX filesystems visible via Qnet, but can not run from a CIFS or NFS filesystem.

Schema files

A schema file contains all the SQL commands to create the database schema the way you want. Here's an example:

 CREATE TABLE customers(
   firstname  TEXT,
   lastname   TEXT

Save that content in /db/customerdb.sql.

Starting the QDB server

If you have any database schema files (for example, /db/customerdb.sql), you need to add them to the QDB configuration file before starting the QDB server. For more information, see The configuration file below.

The QDB server must be run as root.

For debugging purposes, you should start qdb with -vvvvvvvV options to get very verbose output. The v option is cumulative, with each additional v adding a level of verbosity, up to 7 levels. The -V option sends output to the console, as well as to sloginfo.

Once QDB is running, you can check to see that it sees your databases by running ls /dev/qdb/. Using the previous example, we should see a file called /dev/qdb/customerdb.

Temporary storage filesystem

The filesystem the QDB uses for temporary storage must support POSIX file locking. File locking is required for database vacuuming.

The QDB checks its temporary storage as follows:

Auto-attaching databases

You can create a list of databases that you'd like to be combined as if they formed a single database. This is called auto-attaching a database. This is useful for breaking up a database into separate pieces for performance reasons (each piece gets its own lock, which makes multi-user access more responsive). It's also useful for moving parts of a database to different storage mediums (such as a RAM filesystem).

The list of databases is read from a configuration file, specified by the Auto Attach= option. For more information, see The configuration file below.

When using the Auto Attach parameter to attach more than one database to another database (attaching multiple sections to one section) you must make sure that the order in which the sections are listed in the configuration file are the same as the order in which they are listed via the Auto Attach parameters. The examples below show incorrect and correct lists. To simplify the examples, only the section headings are shown; parameters are not shown.


Note that the section definition order does not match the attach order.


Auto Attach = mme_library
Auto Attach = mme_custom
Auto Attach = mme_temp


Note that the section definition order matches the attach order.


Auto Attach = mme_library
Auto Attach = mme_custom
Auto Attach = mme_temp


Note that the attach order matches the section definition order.


Auto Attach = mme_library
Auto Attach = mme_temp
Auto Attach = mme_custom

Database integrity testing

At startup, QDB tests the integrity of databases, according the -I option specified. It will execute statements based on this option, as follows:

Note: The more verification the QDB performs at startup, the greater the time needed for startup. For production environments, you will need to find the optimal balance between the amount of verification required and the time needed to start the QDB.

Testing SQL statements

You can execute SQL statements on your QDB databases from the command-line using the qdbc utility. See qdbc for more information.

The configuration file

QDB is configured with a single file, which is specified with the -c command-line option. If this file is in the same location as the database SQL files (by default this is /db/), you can use relative paths in the configuration file to point to schema files and database locations. Otherwise, you need to use absolute paths.

The configuration file is composed of lines of text. Blank lines are ignored, as is any leading or trailing white space. Lines beginning with a # character are comments. The configuration file consists of named sections, each defined by a name enclosed in square brackets ([ ]). Following each section are parameter lines in the form key=value. Parameters apply to the current section.

Each section is the name of a database. This is the name presented under /dev/qdb, and that clients use to establish a connection. The database is then configured using the following parameters:

Set the name of the actual database file. This is the raw SQLite file. It can be an absolute path to any file location, or can be a relative name (in which case it is relative to the directory which holds the configuration file). At startup either this file must exist, or the directory in which it will be created must exist (otherwise qdb will exit with an appropriate error). If the database file does not exist, it is restored from the newest valid backup if possible, or a blank database file is created.
Schema File=
These options describe the initial schema of the database (as SQL commands which are used to create the initial set of tables, indices, views, content, etc) of a new database (if it did not already exist). In the first form, the SQL commands are in the configuration file. The second form names a file (with either an absolute or relative path) containing the SQL commands.

An initial schema is optional; without an initial schema, a new database will just be empty.

Client Schema=
This entry specifies a client schema, which is executed every time a client calls qdb_connect(). YOu can use this mechanism to implement cross-database triggers.
Auto Attach=
This entry specifies another database to be attached to the current one (using the SQL ATTACH DATABASE statement whenever a database connection is established). The name is the section name of the other database, not a filename. You can specify multiple databases, each on its own Auto Attach= line.

Attached databases are a convenience to provide access to tables that are physically stored in a different database file. Facilities exist in QDB to also include attached databases in other maintenance operations, such as backup or vacuum.

See also Auto-attaching databases above.

Backup Dir=
This entry specifies a directory which is used to store a backup of the database. UPi can specify multiple directories, each on its own Backup Dir= line, and they will be used in rotation to store backup files. This feature ensures that should a backup be interrupted or aborted by a power-failure, another, older, backup is still available.

This directory must exist at startup (though it does not need to contain a valid backup); otherwise qdb exits with an appropriate error. If any existing backup files are located in these directories, they are sorted by date and overwritten oldest-to-newest when performing backup operations, and used in newest-to-oldest order to restore a missing or corrupt database.

This entry specifies a compression algorithm to apply to backups. The supported options are none (for no compression), lzo (for LZO compression), or bzip (for BZIP2 compression). The lzo compression algorithm is fastest, but the bzip algorithm offers the highest compression. The compressed files are created with appropriate extensions added to the original database filename. By default, backup files are not compressed.
These entries install user-provided collation (sorting) routines and user functions (scalar or aggregate) routines respectively. The argument format is, where tag is the symbol name of the function description structure and is the name of the shared library containing the code. For more information, see the Writing User-Defined Functions chapter.

QDB checks for the existence of the library and the specified symbol at startup, and exits with an appropriate error if they're not found.

Vacuum Attached=
Backup Attached=
Size Attached=
These entries control what maintenance operations should apply by default to attached databases when a command is issued to the main database. These options can have a value of TRUE|FALSE, YES|NO or ON|OFF. The default setting for each is FALSE. You can change the option multiple times within the database section to apply differently to attached databases.

Here's a sample configuration:

      Vacuum Attached = TRUE
      Auto Attach = db1
      Vacuum Attached = FALSE
      Auto Attach = db2

In this example, a qdb_vacuum() operation on db will also vacuum db1 but not db2.

You can use the Backup Attached=TRUE setting to provide a facility similar to the old *.bks files. For more details on the scope of maintenance operations with respect to attached databases, refer to qdb_vacuum(), qdb_backup(), and qdb_getdbsize().

To create RAM-based databases, point the Filename= option to the RAM-disk file.

You can also create temporary databases by defining a database with a Filename=:memory: entry. This action creates a private, temporary, in-memory database, visible only in the scope of the database connection. Each connection to such a database has its own temporary file, which is removed when the connection is closed.

Backup Via=
This entry specifies an interim directory into which the database is copied as part of the backup. To make sure the database backup is consistent, qdb places a read lock on the database while it is copying and compressing it, so the database may be locked a long time if the destination is slow (for example, flash).

For example, you could specify Backup Via=/dev/shmem. When backing up, QDB locks the database, copies it to /dev/shmem, and then releases the lock. Then, in a second step, qdb performs the copy and compress operation into the location specified by Backup Dir=, without needing to lock the database.

Compress Via=TRUE|FALSE
This entry is used in conjunction with the Backup Via= entry and any Compression= setting specified for the backup. By default, the Backup Via= makes a raw/uncompressed copy of the database into the temporary directory, and then performs the compression at the second step. This works if you have space, and read-locks the database for the least amount of time, but you can use less space (at the expense of more time) by compressing during the first copy. FALSE is the default; if you make this setting TRUE, then compression is done in the first step.

Sharing connections between clients

You can allow multiple clients to share a database connection. This is controlled by the -C option. These modes are:

Each individual client request gets a new connection. This mode exists for pre-3.3.1 SQLite libraries, which were not thread-safe in any way.
Each client has a private persistent connection for its session; this connection is created when the client attaches and destroyed when it detaches. This mode is the backwards-compatible mode; it is also the mode forced when not using the QDB_CONN_DFLT_SHARE flag to qdb_connect().
Like private, except that connections are returned to a pool rather than being destroyed, and can be assigned from there to a new client for use in its duration.
Like unique, except a connection pool is also used. This mode multiplexes all clients over a small number of active database connections.

Connection sharing exists because a non-negligable amount of work must be done to establish a database connection (QDB must allocate memory, access files, attach databases and callback functions, configure connection parameters, and so on), and if clients do not assume any state, then this processing work can be avoided. The QDB server detects if connection parameters have been changed by a client, and restores them when the connection moves in or out of the pool in unique, reuse or share modes.

This connection sharing should be safe (unless the client destructively modifies the environment via SQL, such as by executing a DETACH DATABASE statement). However, for full backwards compatibility, connection sharing can be overridden on each qdb_connect() call, and the default libqdb access mode is private.

If a client is leaving open transactions across multiple calls to qdb_statement(), then it needs a dedicated connection (private or reuse or should not set the QDB_CONN_DFLT_SHARE flag).

Shared caching

The default startup mode for QDB is with both shared caching and exclusive modes enabled:

Note: QDB will exit immediately if it is started with shared cache disabled and exclusive mode enabled. For example:
# qdb -c /db/qdb.cfg -v -D -Otempstore=/fs/tmpfs -Rset

qdb: Exclusive locking mode requires that shared cache be enabled

Advantages of shared caching

Shared caching can both improve performance times and reduce the total amount of memory cache required for multiple connections. Shared caching also reduces the total amount of memory required for multiple database connections, because multiple connections can share the same memory cache.

For example, without shared caching, if 1 MB of memory is required for each database connection, 40 connections require 40 MB of memory. However, with shared cache enabled, these 40 connections can share the same memory cache, allowing you to reduce the memory cache to 25 MB (or another size determined by your environment and performance requirements). Further, with shared cache, there is no duplication in memory, so in the 25 MB of memory you may have almost the entire database, virtually eliminating the need for disk I/O.

Database recovery

The -R options controls the recovery actions QDB performs when it encounters a missing or corrupt database file. The options are:

In this mode, file manipulation is fully automatic and a best-effort is always made to establish a valid database connection (both at startup and runtime). Files are backed up individually, and restored individually.

A corrupt or missing database file is restored from the most recent, valid backup that can be located. If there is no such backup, then a blank database is recreated from the original schema definition.

In this mode, the only action performed is to create a blank database from the original schema definition if the database file is missing at startup. Databases are not restored from backups. If the file is corrupt, the server will not start. If the file is detected, missing, or corrupt at runtime, no access to that database is permitted, and it will not be restored or re-created. This mode is intended to allow the creation of a new system, or to give manual control over error recovery (for example, to preserve the corrupt database for later analysis).
In this mode, backups of attached databases are treated as a coherent set, so an error with any one of the component databases cause qdb to restore a complete and matching set of all database files. This is useful if attached databases refer to each other.

The set master is the database that attaches other databases (by using the Auto Attach option in the configuration file). The backup set contains the set master and all attached databases that have Backup Attached enabled. The set master can be backed up incrementally and still belong to the set.

Note: QNX recommends the following in order to back up and restore your databases as a coherent set:
  • For the master database (the database to which the other databases are attached), in the QDB configuration file:
    • Set the Backup Attached option to TRUE, as follows:
          Backup Attached = TRUE
    • List the databases you want to attach. For example:
          Auto Attach = mme_library
          Auto Attach = mme_custom
  • Use the -R set option when starting QDB.
  • When doing backups, call qdb_backup() on the master database with the scope argument set to QDB_ATTACH_DEFAULT.

Busy timeout

The two timeout settings are differentiated as follows:

Handling corrupt databases

The -X lets you provide qdb with a program or script to run when it encounters a corrupt database. If the program or script appears to run correctly, qdb will continue. The program or script is responsible for stopping and starting qdb if a start of stop is necessary.

Sample script

Below is a sample qdb startup command with the -X:

# qdb -c /etc/qdb.cfg -X /usr/bin/

Below is a sample script that can be launched by qdb when it encounters a corrupt database:
# This script will kill qdb and mme,
# remove the database files
# on disk, and restart qdb and mme.

slay qdb mme-generic
rm -f /fs/tmpfs/*
rm -f /mnt/qdb_backup/*

# Call an external program
# to launch qdb and the MME.
# /usr/bin/mme-launch


  • To kill qdb without killing the script, send SIGTERM (the default for slay). With this method qdb keeps the thread used by popen() to start the script available and logs output until the script quits.
  • If you send SIGKILL, qdb is killed immediately. The script continues to run but its output is lost.

Maintenance Commands

You can write some maintenance commands to the /dev/qdb/.control entry (and read back the result). The current commands supported are (where DBNAME is the name of the database):