PtWebClient

Widget for displaying web pages

Class hierarchy:

PtWidgetPtBasicPtContainerPtClientPtWebClient

For more information, see the diagram of the widget hierarchy.

PhAB icon:

PtWebClient button in PhAB

Public header:

<photon/PtWebClient.h>

Description:

You can use the PtWebClient widget to start, interact, and control a web server, such as Voyager or NetFront. PtWebClient also provides a user-defined area within your application for the server to format and display web pages. Your application controls the server by setting widget resources. The server communicates status information and user interaction back to the application using the widget callbacks.

PtWebClient transparently supports the version of HTML that the server supports. For more information about the Voyager and NetFront web servers, see the vserver and netfront documentation in the QNX® Momentics® 6.3.0 Web Browser Technology Development Kit Release Notes.


Note: The PtWebClient widget can interact with a web server only on self-hosted systems. On Windows hosts you can use the widget in a PhAB project, but it won't display content until run on a target.

Starting the server

Start the server initially by setting the Pt_ARG_WEB_SERVER resource.

Typically, the PtWebClient widget is in a PhAB application, and its Pt_ARG_WEB_SERVER resource is NULL.

You can set the Pt_ARG_WEB_SERVER resource to either:

If you set this resource to a profile name (for example, online), the widget searches the web server profile files for a match. If a match is found, the widget starts the web server and client name found in the profile; the Pt_ARG_CLIENT_NAME is ignored (since it is already in the profile). If the profile is not found, the widget assumes the resource is the command, including path if required, for the web server's executable.

If you start the profile name with the @ character, there is no profile lookup. Instead, the web client widget discards the @, and uses the remaining string as the command line (including path and options) for starting the server.

To start the current online web server, do the following in the prerealize setup function for the module containing the widget:

PtSetArg( &args[0], Pt_ARG_WEB_SERVER, "online", 0 );
PtSetResources( ABW_web_pane, 1, args );

To use the default off-line web server profile, do the following in the prerealize setup function for the module containing the widget:

PtSetArg( &args[0], Pt_ARG_WEB_SERVER, "offline", 0 );
PtSetResources( ABW_web_pane, 1, args );

Once the server is started, you can check that it was successful by getting the value of Pt_ARG_WEB_STARTUP_ERRNO. For example:

int        *error;

PtSetArg( &args[0], Pt_ARG_WEB_STARTUP_ERRNO, &error, 0 );
PtGetResources( ABW_web_pane, 1, args );

if ( *error != EOK ) {
    /* error occurred - use errno to display message */
}

After successfully starting the server, you can access URLs by setting the Pt_ARG_WEB_GET_URL resources.

Migrating from libPtWeb.so.2 to libPtWeb.so.3

If your browser application has been designed to work with the PtWebClient widget from libPtWeb.so.2, and you want to migrate to the new PtWebClient API in libPtWeb.so.3, you should be aware of some changes that are required in your code:

  1. All the macros starting with WWW_ are renamed to start with Pt_WEB_ now. You should change your code accordingly. For example: WWW_RESPONSE_OK is now Pt_WEB_RESPONSE_OK. The compiler will probably make you aware of this if you try to compile code that uses the old macro names.
  2. In all the structures that are passed either from the server to PtWebClient or from PtWebClient to the server, members that were char member[] are now pointers to char, char *member.

    This change is particularly important in the structures that are filled in by the user. Therefore the following structures have been renamed to make the compiler aware:

    For example, PtWebClientAuthenticationData_t used to be defined as:

    typedef struct {
      short response;
      short type;
      char  userid[255];
      char  password[255];
      char  url[MAX_URL_LENGTH];
    } PtWebClientAuthenticationData_t;

    It's now defined as:

    typedef struct {
      short response;
      short type;
      char  *userid;
      char  *password;
      char  *url;
    } PtWebClient2AuthenticationData_t;

    You should allocate the userid, password and url members , and it's your responsibility to free them.

New resources:

Resource C type Pt type Default
Pt_ARG_WEB_ACTIVATE_LINK int Scalar 0 (write-only)
Pt_ARG_WEB_AUTHENTICATE See below Pointer NULL (write-only)
Pt_ARG_WEB_BUILD_DATE char * String NULL (read-only)
Pt_ARG_WEB_COMMAND PtWebClient2Command_t * Pointer NULL (write-only)
Pt_ARG_WEB_DATA PtWebClient2Data_t * Pointer NULL (write-only)
Pt_ARG_WEB_DOWNLOAD char *, char * String N/A (write-only)
Pt_ARG_WEB_ENCODING char * String NULL
Pt_ARG_WEB_GET_CERTIFICATES See below Pointer NULL (read-only)
Pt_ARG_WEB_GET_CONTEXT char * String NULL (read-only)
Pt_ARG_WEB_GET_HISTORY See below Pointer None (read-only)
Pt_ARG_WEB_GET_URL char * String N/A (write-only)
Pt_ARG_WEB_HELPER See below Pointer NULL (write-only)
Pt_ARG_WEB_H_ERRNO int Scalar 0
Pt_ARG_WEB_IMPORT_CERTIFICATE See below Pointer N/A (write-only)
Pt_ARG_WEB_NAVIGATE_FRAME int Scalar 0
Pt_ARG_WEB_NAVIGATE_LINK int Scalar 0
Pt_ARG_WEB_NAVIGATE_PAGE int Scalar 0
Pt_ARG_WEB_OPTION char *, char* String NULL
Pt_ARG_WEB_PRINT PpPrintContext_t *, int Pointer NULL (write-only)
Pt_ARG_WEB_RELOAD N/A N/A N/A (write-only)
Pt_ARG_WEB_SERVER char * String NULL
Pt_ARG_WEB_SERVER_PID pid_t Scalar read-only
Pt_ARG_WEB_SSL_RESPONSE See below Pointer NULL
Pt_ARG_WEB_STARTUP_ERRNO int Scalar 0
Pt_ARG_WEB_STOP N/A N/A N/A (write-only)
Pt_ARG_WEB_UNKNOWN_RESP See below Pointer NULL (write-only)
Pt_ARG_WEB_VERSION char * String NULL (read-only)
Pt_CB_WEB_AUTHENTICATE PtCallback_t * Link NULL
Pt_CB_WEB_CLOSE_WINDOW PtCallback_t * Link NULL
Pt_CB_WEB_COMPLETE PtCallback_t * Link NULL
Pt_CB_WEB_CONTEXT PtCallback_t * Link NULL
Pt_CB_WEB_DATA_REQ PtCallback_t * Link NULL
Pt_CB_WEB_DOWNLOAD PtCallback_t * Link NULL
Pt_CB_WEB_ERROR PtCallback_t * Link NULL
Pt_CB_WEB_IMPORT_CERTIFICATE PtCallback_t * Link NULL
Pt_CB_WEB_METADATA PtCallback_t * Link NULL
Pt_CB_WEB_NEED_SCROLL PtCallback_t * Link NULL
Pt_CB_WEB_NEW_WINDOW PtCallback_t * Link NULL
Pt_CB_WEB_PAGE_INFO PtCallback_t * Link NULL
Pt_CB_WEB_SSL_CERTINFO PtCallback_t * Link NULL
Pt_CB_WEB_SSL_CERTNONTRUSTED PtCallback_t * Link NULL
Pt_CB_WEB_SSL_CLIENT_CERT_SELECT PtCallback_t * Link NULL
Pt_CB_WEB_SSL_ERROR PtCallback_t * Link NULL
Pt_CB_WEB_START PtCallback_t * Link NULL
Pt_CB_WEB_STATUS PtCallback_t * Link NULL
Pt_CB_WEB_UNKNOWN PtCallback_t * Link NULL
Pt_CB_WEB_URL PtCallback_t * Link NULL

Pt_ARG_WEB_ACTIVATE_LINK (key mode only)

C type Pt type Default
int Scalar 0 (write-only)

This resource activates and deactivates the current link.

Pt_ARG_WEB_AUTHENTICATE

C type Pt type Default
PtWebClient2AuthenticationData_t * Pointer NULL (write-only)

Set this resource to give authentication information to the server when the Pt_CB_WEB_AUTHENTICATE callbacks have been invoked. The data structure used is as follows:

typedef struct {
    short    response;
    short    type;
    char    *userid;
    char    *password;
    char    *url;
} PtWebClient2AuthenticationData_t;
    

The members include:

response
The type of response:
type
The type of authentication:
userid
A pointer to the user's login string.
password
A pointer to the user's password string.
url
A pointer to the URL of the request that invoked the callback.

Pt_ARG_WEB_BUILD_DATE (read only)

C type Pt type Default
char * String NULL (read-only)

The build date of the connected web server.

Pt_ARG_WEB_COMMAND (write only)

C type Pt type Default
PtWebClient2Command_t * Pointer NULL

Tell the server to perform a specific command. The command is specified in the len argument to PtSetArg(). If a pointer to the PtWebClient2Command_t data structure is required with the command, pass it as the value argument to PtSetArg().

The PtWebClient2Command_t data structure is as follows:

typedef struct {
    union {
        struct {
            char   *filename;
        } SaveasInfo;
        struct {
            char *String;
            unsigned long flags;
        } FindInfo;
        struct {
            char *string;
            int number;
        } SetWidgetInfo;
        struct {
            int input_group;
        } ClipboardInfo;
        char   *scroll_to;
        int     reset_type;
        int     num_purge;
    };
} PtWebClient2Command_t;

The commands are:

Pt_WEB_COMMAND_FIND
Find and highlight a word in the current document. The part of the PtWebClient2Command_t data structure used is:
struct {
    char *string;
    unsigned long flags;
} FindInfo;

where:

Pt_WEB_COMMAND_LOADMISSING
Load any missing images.
Pt_WEB_COMMAND_SAVEAS
Save the current document to disk. The part of the PtWebClient2Command_t data structure used is:
struct {
    char   *filename;
} SaveasInfo;

where filename is a pointer to the name of the file in which to save the document.

Pt_WEB_COMMAND_RESET_OPT
Cause any changed options that may change the current visible page to take effect.
Pt_WEB_COMMAND_PURGE_CACHE
Purge the in-memory image and page cache.
Pt_WEB_COMMAND_LOADMISSING_CONTEXT
Load a missing image whose context is valid (the context is valid after a Pt_CB_WEB_CONTEXT callback).
Pt_WEB_COMMAND_SET_WIDGET
Set the value of a text control. The part of the PtWebClient2Command_t data structure used is:
struct {
        char *string;
        int number;
} SetWidgetInfo;

where:

Pt_ARG_WEB_DATA (write only)

C type Pt type Default
PtWebClient2Data_t * Pointer NULL

Voyager server only.

This resource is set in response to a Pt_CB_WEB_DATA_REQ callback. It provides the header and data of the client protocol data stream to the browser.

The data structure used is as follows:

typedef struct {
    int     type;
    char   *url;
    int     length;
    char   *data;
} PtWebClient2Data_t;

The members are:

type
Possible values:
url
A pointer to the URL of this client data stream.
length
The number of bytes of data (no more than what was asked for in the Pt_CB_WEB_DATA_REQ callback).
data
A pointer to the data.

Here's an example of using the client protocol:

int web_data( PtWidget_t *widget, ApInfo_t *apinfo,
              PtCallbackInfo_t *cbinfo )
{
    PtArg_t                 args[1];
    PtWebClient2Data_t       webdata;
    PtWebDataReqCallback_t  *web_data_req = cbinfo->cbdata;
    const char              *html =
"<html><body bgcolor=\"#ffffff\"><p>\
<center><table border=1 bgcolor=\"#f8f7d9\"><tr>\
<td>This is a simple test of the client protocol</td>\
<td><font size=4>Voyager Client: Version 2.01\
<br>Built on: %s<br><hr>\
<font size=4>Voyager Server: %s<br>Built on: %s\
</font></center></td></tr></table></center>
<p>\
</body></html>\n";
    char                    about[512];
    static int              about_sent;

    /* eliminate 'unreferenced' warnings */
    apinfo = apinfo;

    if ( !strcmp( web_data_req->url, "client:about" ) ) {
        if( cbinfo->reason_subtype == Pt_WEB_DATA_HEADER ) {
            const char *data = "Content-Type: text/html\n";
            webdata.type = Pt_WEB_DATA_HEADER;
            webdata.length = strlen(data);
            strcpy( webdata.url, web_data_req->url );
            PtSetArg( &args[0], Pt_ARG_WEB_DATA, data,
                      &webdata );
            PtSetResources( widget, 1, args );
        } else if( cbinfo->reason_subtype == Pt_WEB_DATA_BODY ) {
            /*
             * Since no content length was given, you need
             * to signal EOF with a zero length data packet
             */
            if ( about_sent ) {
                webdata.type = Pt_WEB_DATA_BODY;
                strcpy( webdata.url, web_data_req->url );
                webdata.length = 0;
                PtSetArg( &args[0], Pt_ARG_WEB_DATA, "",
                          &webdata );
                PtSetResources( widget, 1, args );
                about_sent = 0;
            } else {
                char *version, *build_date;

                PtSetArg( &args[0], Pt_ARG_WEB_VERSION,
                          &version, 0 );
                PtSetArg( &args[1], Pt_ARG_WEB_BUILD_DATE,
                          &build_date, 0 );
                PtGetResources(widget, 2, args );
                sprintf( about, html, __DATE__, version,
                         build_date );
                webdata.type = Pt_WEB_DATA_BODY;
                strcpy( webdata.url, web_data_req->url );
                webdata.length = strlen(about);
                PtSetArg( &args[0], Pt_ARG_WEB_DATA, about,
                          &webdata );
                PtSetResources( widget, 1, args );
                about_sent = 1;
            }
        }
    } else {
        if( cbinfo->reason_subtype == Pt_WEB_DATA_HEADER ) {
             /*
              * If I give a content length then I don't need
              * provide a zero byte data packet
              */
            const char *data =
              "Content-Type: text/plain\nContent-Length: 20\n";
            webdata.type = Pt_WEB_DATA_HEADER;
            webdata.length = strlen(data);
            strcpy( webdata.url, web_data_req->url );
            PtSetArg( &args[0], Pt_ARG_WEB_DATA, data,
                      &webdata );
            PtSetResources( widget, 1, args );
        } else if( cbinfo->reason_subtype == Pt_WEB_DATA_BODY ) {
            const char *data = "Unknown client type\n";
            webdata.type = Pt_WEB_DATA_BODY;
            strcpy( webdata.url, web_data_req->url );
            webdata.length = strlen( data );
            PtSetArg( &args[0], Pt_ARG_WEB_DATA, data,
            &webdata );
            PtSetResources( widget, 1, args );
        }
    }
    return( Pt_CONTINUE );
}

Pt_ARG_WEB_DOWNLOAD (write only)

C type Pt type Default
char *, char * String N/A

This resource lets you download a file without having to wait for the Pt_CB_WEB_UNKNOWN callback to provide a file. The value argument of PtSetArg() should contain the URL of the file to download and the len argument should contain the filename to save it as.


Note: Pt_ARG_WEB_DOWNLOAD does GET requests only.

Pt_ARG_WEB_ENCODING

C type Pt type Default
char * String NULL

The current document encoding. See PxTranslateSet() in the Photon Library Reference.

For the netfront server, you can set this resource to Autodetect Encoding (the default setting). When this value is set, the netfront server will try to auto detect the encoding.

Pt_ARG_WEB_GET_CERTIFICATES (read only)

C type Pt type Default
PtWebSSLClientCertificates_t * Pointer NULL

This resource gets information about current client certificates.

The data structure used is as follows:

typedef struct {
  int ncert;
  char *url;
  int reserved1;
  int reserved2;
  PtWebSSLCertInfo_t info[1];
  } PtWebSSLClientCertificates_t;

The members are:

ncert
The number of certificates.
url
Not used.
info
A PtWebSSLCertInfo_t structure that contains information about the certificate. See the Pt_CB_WEB_SSL_CERTNONTRUSTED resource for a description of the PtWebSSLCertInfo_t structure.

Pt_ARG_WEB_GET_CONTEXT (read only)

C type Pt type Default
char * String NULL

This resource gets the context information, which is valid after a Pt_CB_WEB_CONTEXT callback. To get context information, specify the type in the len argument of PtSetArg().

The possible context types are:

Pt_WEB_CONTEXT_ANCHOR
The URL of a link.
Pt_WEB_CONTEXT_OBJECT
The URL of a image or embedded object.
Pt_WEB_CONTEXT_BKGD
The URL of a background image.

Pt_ARG_WEB_GET_HISTORY (read only)

C type Pt type Default
PtWebClientHistory_t * Pointer None

Use this resource to get the site history list from the browser. This is a list of titles and URLs of all the sites visited in the timeframe specified in the History_Expire option (default 4 days).

The data structures used with this resource are:

typedef struct  {
    short num;
    short offset;
} PtWebClientHistory_t;
    

where:

and:

typedef struct  {
    char   *title;
    char   *url;
    time_t  lastvisited;

} PtWebClientHistoryData_t;
    

When you use these structures, you pass PtWebClientHistory_t as the value argument to PtSetArg(), and PtWebClientHistory_t as the len argument.

Here's an example of how to get the history:

PtArg_t args[1];
PtWebClientHistoryData_t list[HISTORY_REQUEST_SIZE];
PtWebClientHistory_t list_info;
char *description[HI_MAX_LIST_SIZE];
int i, item_count = 0, loop = TRUE;

list_info.num = HISTORY_REQUEST_SIZE;
list_info.offset = 0;

/* retrieve history list from voyager server */
while (loop) {
    /* get the next 10 history entries */
    PtSetArg(&args[0], Pt_ARG_WEB_GET_HISTORY,
             &list, &list_info);
    PtGetResources( w, 1, args);

    for (i=0; i < 10; i++, item_count++) {
        if (list[i].url[0] == NULL ||
            list[i].url[0] == 0 ||
            item_count >= HI_MAX_LIST_SIZE) {
            loop = FALSE;
            break;
        }
        if ( description[item_count] =
             malloc(strlen(list[i].url) +
                    strlen(list[i].title) + 4) )
            sprintf(description[item_count], "%s\t%s\t",
                    list[i].title, list[i].url);
    }
    list_info.offset += HISTORY_REQUEST_SIZE;
}

Pt_ARG_WEB_GET_URL (write only)

C type Pt type Default
char * String N/A

The URL that you want the browser to display or save. Set the len argument of PtSetArg() to one of:

Pt_WEB_ACTION_DISPLAY
Display the URL in the browser.
Pt_WEB_ACTION_SAVEAS
Download and save the URL.

You can OR the following flags into the action to control the caching of the page and the recording of history (these flags are supported by vserver only):

Pt_WEB_NO_MEMORY_CACHE
Don't cache the page in memory.
Pt_WEB_NO_DISK_CACHE
Don't cache the page on disk.
Pt_WEB_NO_SITE_HISTORY
Don't record the site in the site history.
Pt_WEB_NO_PAGE_HISTORY
Don't record the site in the page history.

Note:
  • When saving a URL, the browser responds with a Pt_CB_WEB_UNKNOWN to obtain a filename to save the file once it has determined that it can get the URL or see Pt_ARG_WEB_DOWNLOAD .
  • The maximum length of a URL string is 1024 bytes or MAX_URL_LENGTH.

Pt_ARG_WEB_HELPER (write only)

C type Pt type Default
PtWebClient2HelperData_t * Pointer NULL

Setting this resource tells the server which external helper applications are available. The data structure used is as follows:

typedef struct {
    short   action;
    char    *mimetype;
    char    *suffixes;
    char    *encoding;
    char    *helperapp;
} PtWebClient2HelperData_t;
    

The members of this structure are:

action
The action to take:
mimetype
A pointer to the mimetype of the data that the helper application can handle.
suffixes
A pointer to the file suffixes of the helper application data files (e.g. "mpeg mpg").
encoding
Currently not used.
helperapp
A pointer to the complete filename to the helper application; use %s to indicate where the data file should appear on the command line.

Note: If you wish to control the running of the helper application yourself, add the helper with no help application (i.e. helperapp=""). A Pt_CB_WEB_UNKNOWN callback is called if an HTML page contains an <embed> tag to a file with the mimetype or suffix provided. (Normally these files are ignored.)

Pt_ARG_WEB_H_ERRNO

C type Pt type Default
int Scalar 0

The value of h_errno after a DNS failure. The possible values are:

HOST_NOT_FOUND
No such host is known.
NO_DATA
The name is known to the name server, but has no IP address associated with it—this isn't a temporary error. Another type of request to the name server using this domain name results in an answer (e.g. a mail-forwarder may be registered for this domain).
NO_RECOVERY
Some unexpected server failure was encountered. This is a nonrecoverable error.
TRY_AGAIN
This is usually a temporary error and means that the local server didn't receive a response from an authoritative server. A retry at some later time may succeed.

Pt_ARG_WEB_IMPORT_CERTIFICATE

C type Pt type Default
PtWebImportCertificate_t Pointer 0

NetFront server only.

Set this resource when you want a client certificate to be imported.

The data structure used is as follows:

typedef struct {
  int type;
  char *path;
  } PtWebImportCertificate_t;
    

The members include:

type
The type of certificate to be imported. It can be one of:
path
The full path to the file that contains the certificate data.

After you set this resource, the netfront server starts importing the certificate. If the certificate is password-protected, netfront issues a Pt_CB_WEB_AUTHENTICATE with type=Pt_WEB_IMPORT_CERT_AUTHENTICATION. (In this case action, realm, and url aren't used.) The client responds by setting the password member of the Pt_ARG_WEB_AUTHENTICATE resource. The netfront server then continues importing the certificate. If an error or a warning needs to be displayed, the Pt_CB_WEB_SSL_ERROR and Pt_CB_WEB_SSL_CERTNONTRUSTED are invoked with reason set to Pt_WEB_SSL_IMPORT_CERT.

At the end of the import process, a Pt_CB_WEB_IMPORT_CERTIFICATE is invoked indicating whether the process was successful or not.

Pt_ARG_WEB_NAVIGATE_FRAME

C type Pt type Default
int Scalar 0

Controls focus navigation of FRAMES pages when the browser is in key mode. Set the value argument of PtSetArg() to one of:

Pt_WEB_DIRECTION_UP
Focus the frame above the current one.
Pt_WEB_DIRECTION_DOWN
Focus the frame below the current one.
Pt_WEB_DIRECTION_LEFT
Focus the frame to the left of the current one.
Pt_WEB_DIRECTION_RIGHT
Focus the frame to the right of the current one.
Pt_WEB_DIRECTION_FWD
Focus the next frame.
Pt_WEB_DIRECTION_BACK
Focus the previous frame.

Note: The next and previous directions are defined by the order of the <FRAME> tags in each <FRAMESET> tag.

Pt_ARG_WEB_NAVIGATE_LINK

C type Pt type Default
int Scalar 0

This resource controls focus navigation of links on the current page when the browser is in key mode. Set the value argument to PtSetArg() to one of the following:

Pt_WEB_DIRECTION_UP
Focus the link above the current one.
Pt_WEB_DIRECTION_DOWN
Focus the link below the current one.
Pt_WEB_DIRECTION_LEFT
Focus the link to the left of the current one.
Pt_WEB_DIRECTION_RIGHT
Focus the link to the right of the current one.
Pt_WEB_DIRECTION_FWD
Focus the next link.
Pt_WEB_DIRECTION_BACK
Focus the previous link.
Pt_WEB_DIRECTION_FIRST
Focus the first link on the current page.
Pt_WEB_DIRECTION_LAST
Focus the last link on the current page.

When an IMAGE-MAP type link has been activated, this resource is used to navigate the “ImageMap_Cursor” over the image map in the specified direction. The len argument is then used to specify the number of pixels to move the cursor.

When a FORM type object has been activated (given focus), these commands are turned into cursor-key directions and given to the form object.


Note: The next and previous directions are defined by the order of the links in the HTML page.

Pt_ARG_WEB_NAVIGATE_PAGE

C type Pt type Default
int Scalar 0

This resource controls the scrolling of the displayed page and the ability to navigate back and forward through pages in the page history. Set the value argument to a direction and the len argument to the amount to scroll, in percentage of the visible page (e.g. 100 to scroll one full page). The direction must be one of:

Pt_WEB_DIRECTION_UP
Scroll the page up.
Pt_WEB_DIRECTION_DOWN
Scroll the page down.
Pt_WEB_DIRECTION_LEFT
Scroll the page to the left.
Pt_WEB_DIRECTION_RIGHT
Scroll the page to the right.
Pt_WEB_DIRECTION_FWD
Go to the previous page in the page history.
Pt_WEB_DIRECTION_BACK
Go to the next page in the page history.

Note: The len argument has no effect when using Pt_WEB_DIRECTION_FWD or Pt_WEB_DIRECTION_BACK.

Getting the value of this resource indicates whether or not you can perform a given operation. Currently, only Pt_WEB_DIRECTION_FWD and Pt_WEB_DIRECTION_BACK are supported.

The format of the data returned is 1 << Pt_WEB_DIRECTION_xx. For example:

int    *nav_dir;

PtSetArg( &arg, Pt_ARG_WEB_NAVIGATE_PAGE, &nav_dir, 0 );
PtGetResources( webclient, 1, args );

if ( *nav_dir & (1 << Pt_WEB_DIRECTION_FWD ) ) {

    /* I can go forward in the page history  */

} else if ( *nav_dir & (1 << Pt_WEB_DIRECTION_BACK ) ) {

    /* I can go backward in the page history */

}

Pt_ARG_WEB_OPTION

C type Pt type Default
char *, char* String NULL

Set this resource to set options on the web server. This resource takes two parameters:

For example, to change the scrollbar size:

PtArg_t args[1];

PtSetArg( &args[0], Pt_ARG_WEB_OPTION, "10",
          "iScrollbarSize" );
PtSetResources( webclient_wgt, 1, args );
    

You can read the options from the server by getting the value of this resource. The following piece of code increases the font size by one level:

char *size;

PtSetArg( &args[0], Pt_ARG_WEB_OPTION, &size,
          "iUserTextSize" );
PtGetResources( ABW_web_pane, 1, args );

if ( size ) {
    fontsize = atoi( size );
    if ( fontsize < 3 ) {
        sprintf( buf, "%d", fontsize + 1 );
        PtSetArg( &args[0], Pt_ARG_WEB_OPTION,
                  buf, "iUserTextSize" );
        PtSetResources( ABW_web_pane, 1, args );
    }
}

Note: If you're changing options that have visual effects after the PtWebClient widget is realized, then you must issue a reset command in order for the changes to be seen. The command is as follows:
PtSetArg( &args[0], Pt_ARG_WEB_COMMAND, 0,
          Pt_WEB_COMMAND_RESET_OPT );
PtSetResources( ABW_web_pane, 1, args );
    

The following sections list the options and their defaults:

HTML Options

The HTML options are:

A:active color
The color of a link when you click on it with the mouse.

Default: "#ff0000"

A:link color
The normal color of a link.

Default: "#0000ff"

A:visited color
The color of a link after it's been visited.

Default: "#008080"

bAutoLoadImages
Voyager server only.

If "TRUE", images are loaded as they're encountered in the page. If "FALSE", images are loaded only if the Pt_WEB_COMMAND_LOADMISSING command is issued.

Default: "TRUE"

bDisableHighlight
Voyager server only.

Don't highlight text while dragging over it.

Default: "FALSE"

bDisableImagePlaceHolders
Voyager server only.

Disable drawing image placeholders for missing or invalid images.

Default: "FALSE"

bIgnoreDocumentAttributes
Voyager server only.

If "TRUE", color attributes override what's specified in the page.

Default: "FALSE"

bkey_mode
Voyager server only.

If set to "TRUE", key navigation is enabled.

Default: "FALSE"

BODY background
The color of the page background.

Default: "#ffffff"

BODY color
The color of text inside the body on the HTML page.

Default: "#000000"

BODY font-family
The font family name of the text in the body portion of the page.
BODY margin-right
The margin, in pixels, between right side of display area and the first visible element in the page (Note: page tags may override this).

Default: "10"

BODY margin-top
The margin, in pixels, between top of display area and the first visible element in the page (Note: page tags may override this).

Default: "20"

bot_border_color
Voyager server only.

The bottom color of borders in frame pages.

Default: "#606060"

bot_focus_color
Voyager server only.

The bottom color of the focus box in key mode.

Default: "#7f7f00"

bUnderlineLinks
If "TRUE", the link on a page is underlined.

Default: "TRUE"

bview_source
Voyager server only.

Allow page source to be viewed. Setting this option to "FALSE" saves memory.

Default: "TRUE"

disable_exception_dlg
Don't allow the Javascript exception dialog to be displayed.

Default: "FALSE"

disable_new_windows
Don't allow Javascript windows to open.

Default: "FALSE"

enable_link_arm
Voyager server only.

Activate links on arming (useful for touch screens).

Default: "FALSE"

enable_print_bgcolor
Voyager server only.

Print background colors.

Default: "FALSE"

Focus_Outline_Color
NetFront only
The colour of the focus outline, in RGB format.

Default: "#9098F8"

form_font
Voyager server only.

The font used for lists, comboboxes, submit buttons and reset buttons.

frame_spacing
Voyager server only.

The spacing between frames, in pixels.

Default: "2"

H* font-family
Voyager server only.

The font family name of the text used in headings on the page.

iReformatHandling
Voyager server only.

Reformat handling

Default: "2"

Possible values:

iScrollbarSize
The scrollbar width, in pixels.

Default: "16"

iUserTextSize
The base logical font size of text size used in the page.

Defaults:
Voyager — "2"
NetFront — "100"

Possible values:
Voyager uses values between "0" and "4" for small to large text, with "2" being average size.
NetFront uses values larger than "5", which represent the percent of original size of the text, with "100" being the original size.

java_disable
Voyager server only.

Disable Java applet tag parsing (forced "TRUE" if vgr_javanpl.so isn't found).

Default: "FALSE"

mono_form_font
Voyager server only.

The font used for editable form fields.

PRE font-family
Voyager server only.

The font family name used for preformatted text ( this should be a fixed-width font).

top_border_color
Voyager server only.

The top color of borders in frame pages.

Default: "#ffffff"

top_focus_color
Voyager server only.

The top color of the focus box in key mode.

Default: "#ffff00"

underline_width
Voyager server only.

The line thickness, in pixels, of the underline used on links.

Default: "1"

HTTP cookie options

The HTTP cookie options are:

cookiejar_name
The name of file to store cookie information in.

Default: "cookie.jar"

cookiejar_path
The directory used to write the cookie file in.

Default: "$(HOME)"

cookiejar_save_always
Voyager server only.

Always keep the cookie-jar file on disk up-to-date.

Default: "FALSE"

cookiejar_size
The maximum size, in bytes, that the cookie-jar file is allowed to grow. A value of "-1" means no limit.

Default: "-1"

Authentication options

The authentication options are:

max_password_guesses
Voyager server only.

The maximum number of guesses allowed when performing authentication.

Default: "3"

FTP options

The FTP options are:

email_address
Voyager server only.

The email address used for the password on anonymous logins on the FTP server.

Default: "80"

ftp_proxy_host
Voyager server only.

The host name or IP address of proxy server for FTP requests.

Default: none

ftp_proxy_port
Voyager server only.

The port number on the FTP proxy server to use.

Default: "80"

proxy_overrides
A comma-separated list of host names or IP addresses to bypass the FTP proxy server when accessed.

Default: "80"

Gopher options

The Gopher options are:

gopher_proxy_host
Voyager server only.

The host name or IP address of the proxy server for gopher requests.

Default: none

gopher_proxy_port
Voyager server only.

The port number on the gopher proxy server to use.

Default: "80"

proxy_overrides
A comma-separated list of host names or IP addresses to bypass the gopher proxy server when accessed.

Default: none

HTTP options

The HTTP options are:

http_proxy_host
The host name or IP address of the proxy server for HTTP requests.

Default: none

http_proxy_port
The port number on the HTTP proxy server to use.

Default: "80"

proxy_overrides
A comma-separated list of host names or IP addresses to bypass the HTTP proxy server when accessed.

Default: none

File options

The file options are:

file_display_dir
Voyager server only.

Display directory listings as HTML pages. For example, file:/ produces an HTML page with the content of the root directory.

Default: "TRUE"

file_strict_access
Voyager server only.

Enable strict file access (file: URLs must have the Pt_WEB_STRICT_FILE_ACCESS flag set when requested via Pt_ARG_WEB_GET_URL or Pt_ARG_WEB_DOWNLOAD).

Default: "FALSE"

Image options

The image options are:

bProgressiveImageDisplay
Display images progressively as they're being loaded.

Default: "TRUE"

concurrent_decodes
The number of concurrent JPEG decodings that should be done. This option is write-only. This option can save significant memory when decoding JPEGS to 256 colors.

Default: "4"

quantize_jpegs
Voyager server only.

Always convert JPEGs to a 256-color palette. (The default is based on the current graphics mode; if running on a high-color or direct-color graphics driver, JPEGs are converted to the default color mode, usually 24-bit. If a palette-based graphics driver is running, the JPEGs are always converted to 256 colors using the current hardware palette, and setting this option has no effect.)

Default: "FALSE"

Print options

The print options are:

Print_Left_Footer_String
The left footer used when printing.

Default: "Page &"

Print_Left_Header_String
The left header string used when printing.

Default: "&w"

Print_Header_Font
The font used in the header and footer.

Default: "helv"

Print_Header_Font_Size
The font size used in the header and footer.

Default: "8"

Print_Right_Footer_String
The right footer used when printing.

Default: "&d &t"

Print_Right_Header_String
The right header string used when printing.

Default: "&u"

You can use these special characters in the header and footer strings:

"&w"
Page title.
"&u"
URL.
"&p"
Page number.
"&d"
Date — American style (mmm dd yyyy).
"&D"
Date — European style (dd mmm yyyy).
"&t"
Time — 12-hour format (HH:MM am”).
"&T"
Time — 24-hour format (HH:MM).
"&&"
The ampersand ("&") character.

SOCKS options

These options are for the Voyager server only. The SOCKS options are:

socks_app
The application name to pass to the SOCKS server.

Default: none

socks_port
The port number on the SOCKS server to use.

Default: none

socks_server
The host name or IP address of the SOCKS server for any requests.

Default: none

socks_user
The user ID to pass to the SOCKS server.

Default: none

TCP/IP options

The TCP/IP options are:

file_buckets
Voyager server only.

Fill network buffers before processing them.

Default: "TRUE"

max_connections
Default: "4"
socket_timeout
Voyager server only.

Default: "2400"

Disk-cache options

The disk-cache options are:

clear_main_cache_on_exit
Clear the on-disk cache when the browser exits.

Default: "FALSE"

dcache_verify_policy
0 means never verify if the document has changed;
1 means verify if the document has changed once per session;
2 means always verify if the document has changed.

Default: "0"

Note: Verifying is done by using the “If-Modified-Since” request-header.

enable_disk_cache
Enable on-disk caching.

Default: "TRUE"

keep_index_file_updated
Voyager server only.

Keep the disk-cache index file updated on disk when it changes, instead of updating it once on exiting.

Default: "FALSE"

main_cache_dir
Voyager server only.

The directory used to store cache files.

Default: "/tmp"

main_cache_kb_size
The maximum size of the on-disk cache.

Default: "5000"

main_index_file
Voyager server only.

The name of the cache index file.

Default: "main.ndx"

Miscellaneous options

The miscellaneous options are:

IBeam_Cursor
See /usr/include/photon/PhCursor.h

Default: "e90e" (the insert cursor)

Link_Cursor
See /usr/include/photon/PhCursor.h

Default: "e90c" (the finger cursor)

Normal_Cursor
See /usr/include/photon/PhCursor.h

Default: "e900" (the pointer cursor)

Page_History_Length
The maximum number of pages allowed in the page history (back/forward history).

Default: "50"

Use_Anti_Alias
Use anti-aliased fonts.

Default: "TRUE"

Use_Double_Buffer
Enable double-buffered rendering.

Default: "TRUE"

Visitation_Horizon
The number of days after which to expire the visited links display (i.e. VLINK -> LINK).

Default: "4"

Voyager-server-only miscellaneous options:

Accept_Charset_Header
The value string to pass with the Accept-Charset header (see the HTTP specification).

Default: "TRUE"

Accept_Language_Header
The value string to pass with the Accept-Language header (see the HTTP specification).

Default: "TRUE"

Global_History_File
The full pathname of the file to store the site history list in. (Note: this page is an HTML-formatted page.)

Default: none

History_Expire
The number of days used to expire entries in the site history list. (Note: set to "0" to remove the history when the client is shut down and restarted.)

Default: "4"

Image_Cache_Size_KB
The size of image cache, in kilobytes.

Default: "1024"

ImageMap_Cursor
See /usr/include/photon/PhCursor.h

Default: "e90c" (the finger cursor)

ImageMap_Cursor_NoLink
See /usr/include/photon/PhCursor.h

Default: "e900" (the pointer cursor)

LinkWait_Cursor
See /usr/include/photon/PhCursor.h

Default: "e918" (the point-wait cursor)

NormalWait_Cursor
See /usr/include/photon/PhCursor.h

Default: "e918" (the point-wait cursor)

Page_Cache_Size
The number of pages kept in memory.

Default: "4"

Safe_Memory_Free
The minimum amount of memory, in kilobytes, to leave for the system. If the system has less than this amount available, Voyager's requests to allocate memory fail.

Default: "0"

Show_Server_Errors
Display the HTML-formatted error pages received from the remote HTTP servers. Otherwise, generate a Pt_CB_WEB_ERROR callback.

Default: "FALSE"

Site_History_Length
The maximum number of sites allowed in the site history (the list is obtained from server).

Default: "500"

Use_Explicit_Accept_Headers
Send an explicit Accept: content-type header request field in the HTTP header; otherwise send Accept: */*.

Default: "TRUE"

Wait_Cursor
See /usr/include/photon/PhCursor.h

Default: "e908" (the wait cursor)

NetFront-specific options

These options are specific to the netfront server.

ServerId
(Read only) The string identifier for the server. You can use this string if your client can be used with both the vserver and netfront servers, and you want to do specific things when connected to a certain server. The strings returned are vserver and Netfront, respectively.
iUserZoom
A numeric value for the global (text and image) zoom factor, in percent. A value of "100" means original size.
fNavigatorUserAgent
The user agent string.
memory_cache_kb_size
The amount of in-cache memory. The default is 0.
fEnableWML
Enable Wireless Markup Language (WML/WAP) support. The default is "FALSE".
fDisableSelection
Disable text slection. When "TRUE", a user can't select HTML text in the netfront canvas. The default is "FALSE".
fDisableJavascriptAlert
Disable Javascript alert() dialogs. When "TRUE", JavaScript alert() dialogs aren't displayed. The default is "FALSE".
fDisableJavascriptConfirm
Disable Javascript confirm() dialogs. When "TRUE", JavaScript confirm() dialogs aren't displayed. The default is "FALSE".
fDisableJavascriptPrompt
Disable Javascript prompt() dialogs. When "TRUE", JavaScript prompt() dialogs aren't displayed. The default is "FALSE".

These options are write-only:

fRunJavaScript
If "TRUE", JavaScript is enabled.

Default: "TRUE"

fScriptDisables
Validates/invalidates external script files. Possible values are:

Default: "DISABLES_NONE"

fCSSDisables
Options used to configure CSS. Possible values are:

Set to "FLAG_NONE" to clear all flags.

Default: all flags enabled.

fSSLVersion
The version of SSL to use. Can be a combination of values:

Set to "FLAG_NONE" for none.

Default: all flags enabled.

fDisplayTable
Sets whether the browser displays <table> elements described in content by table style or not.

Default: "TRUE"

fDisplayImage
Sets whether the browser displays images.

Default: "TRUE"

fAnimateImage
Sets whether the browser animates images.

Default: "TRUE"

fWaitDecodeImage
Sets whether the browser waits until an image is displayed to decode it.

Default: "FALSE"

fAnimationImageMaxLoops
The maximum number of animation loops for images. No limit if set to "-1".

Default: "-1"

fMaxImageDelayTime
The maximum delay time for animations, in milliseconds. No limit if less than "0".

Default: "-1"

fMinImageDelayTime
The minimum delay time for animations, in milliseconds. No limit if less than "0".

Default: "-1"

fMaxImageWidth
The maximum display width size of images, in pixels. Possible values are:

Default: "0"

fMaxImageHeight similar
The maximum display height size of image (in pixels). Possible values are:

Default: "0"

fMaxPixelsPerImage
The maximum image size, which is the width × height, in pixels. No limit if set to "-1".

This sets the maximum image file size that can be displayed. The size is determined by the width and height recorded in the image file before the browser engine converts the size. It isn't related to the attribute values specified by the image's HTML tag. If the image size is larger than the specified value or the image header is damaged, the browser cancels decoding and it displays the image-data-damaged icon. This prevents a memory shortage when the browser attempts to reserve memory for an abnormally large image.

Default: "-1"

fKeepResizedImage
Sets whether the browser retains a temporary image or not when it scales an image up or down.

Default: "FALSE"

fMaxPixelsPerDecodedPixelMap
Sets the maximum pixel map size. Possible values are:

Default: "-1"

If a large image causes a lack of memory when it's decoded, nothing can be displayed. Setting the appropriate value for fMaxPixelsPerDecodedPixelMap enlarges the reduced image again, and enables the browser to display the rough image with a resolution lower than its original.

If the pixel map size is larger than the specified maximum size, a reduction decode is attempted so that the image is the specified size or smaller. If the decoder is unable to reduce the image to the specified size, the image-data-damaged icon is displayed.

fDeleteImageBound
Possible values are:

Default: "-1"

fImageResizeAlgorithm
The algorithm to use to reduce images. Possible values are:

Default: "IMAGERESIZE_SIMPLE"

fPixelMapProtectInMemoryCrisis
Sets whether to protect (by releasing) the pixelmap or not when a memory error occurs, except when processing images.

Default: "TRUE"

fMaxActiveDecoders
The maximum number of image decoders that can operate at the same time (except the image decoder operating on animation). No limit when set to -1.

Default: "-1"

fIncrementalReflow
Possible values are:

Default: "FALSE"

fTextareaRows
Default value for the rows attribute of the <textarea> element.

Default: "4"

fTextareaCols
Default value for the cols attribute of the <textarea> element.

Default: "20"

fBlinkOnPeriod
The “on” time for the <blink> element, in milliseconds.

Default: "1500"

fBlinkOffPeriod
The “off” time for the <blink> element, in milliseconds.

Default: "800"

fBlinkLimitTime
The time limit for blinking of the <blink> element, in milliseconds. Set to "-1" for no limit.

Default: "-1"

fWapMarqueeSpeedFast
The fast speed of a <marquee> element, in milliseconds.

Default: "60"

fWapMarqueeSpeedNormal
The normal speed of a <marquee> element, in milliseconds.

Default: "82"

fWapMarqueeSpeedSlow
The slow speed of a <marquee> element, in milliseconds.

Default: "100"

fWaitStartMarquee
Specifies whether to delay scrolling a <marquee> element until the marquee is displayed.

Default: "FALSE"

fMaxTotalContentsSize
The maximum size, in bytes, of the content displayed in one page. This setting requires a restart to take effect. Set it to "-1" for no limit.

Default: "-1"

Fit_Into_Pane
Turns Smart-Fit mode on or off. Smart-Fit fits a display to the window width.

Default: "FALSE"

fProgressiveOnlyDisplayed
Sets how progressive display works:

Default: "TRUE"

fDisplayCompact
Sets the behavior if content protrudes off the screen:

Default: "FALSE"

fTabWidth
Sets the width of the tab character in the <pre> element.

Default: "8"

fEnableFrameSet
Enables the <frameset> tag.

Default: "TRUE"

fEnableIFrame
Enables the <iframe> tag.

Default: "TRUE"

fInhibitLineOverlap
Prevents lines of text from overlapping in the situation where a small value is set for line-height in a style sheet, but there's no small font.

Default: "FALSE"

fCanvasMarginWidth
The margin width of the drawing content area. This is the default value of the <body> tag.

Default: "2"

fCanvasMarginHeight
The margin height of the drawing content area. This is the default value of the <body> tag.

Default: "2"

fRememberFormValue
Sets whether the browser saves the content entered in a form to its history (excluding <input> where "type" is password).

Default: "TRUE"

fEnableClientPull
Allows the browser to attempt a connection due to a client pull when it is browsing off-line.

Default: "TRUE"

fNotifyInclError
Indicates whether the browser notifies you if an error occurs when loading embedded content, such as images.

Default: "FALSE"

fPDConfig
Specifies when mouse events are generated. Can be one of these values:

Or: "FLAG_NONE" — none of the above.

Default: "FLAG_NONE"

fAutoSetFocus
Specifies whether focus is set if there is a focus target on screen:

Default: "FALSE"

fAccesskeyFocusOnlySubmitReset
Specifies the behavior of pressing the access key specified by the accesskey attribute of form <input> elements:

Default: "FALSE"

fEnableTabIndex
Specifies whether a tab index is enabled:

Default: "TRUE"

fTabOrder
Specifies the tab order:

Default: "TABORDER_DISPLAY"

fFocusOutlineWidth
Specifies the border for image maps or buttons with focus, in pixels. Must be ≥1.

Default: "1"

fFocusOutlineWidthForControl
Specifies the border for controls with focus, in pixels:

Default: "1"

fFocusOutlineWidthForIFrame
The border width of the focus frame, in pixels, for the inline frame.

Default: "1"

fContentParserMaxStayTime
The maximum time for the “content parser progress”, before it can be interrupted, in milliseconds. This process analyzes the text data and builds the internal DOM tree. Set to "0" or more.

Default: "100"


Note: Higher values for “progress stay” times can result in faster page-rendering times. Lower values means the process is interrupted more often, possibly resulting in slower rendering times, but also allowing processes other than the browser engine more processor time.

fPageMakerMaxStayTime
The maximum time for the “page maker progress”, before it can be interrupted, in milliseconds. Set to "0" or more.

Default: "100"


Note: Higher values for “progress stay” times can result in faster page rendering times. Lower values means the process is interrupted more often, possibly resulting in slower rendering times, but also allowing processes other than the browser engine more processor time.

fEditorMaxStayTimeFG
The maximum time for the “editor progress” for the visible display area, in milliseconds. In this process, the rendering engine calculates the layout information and draws the content to the currently displayed area. Set to "0" or more.

Default: "100"


Note: Higher values for “progress stay” times can result in faster page rendering times. Lower values means the process is interrupted more often, possibly resulting in slower rendering times, but also allowing processes other than the browser engine more processor time.

fEditorMaxStayTimeBG
The maximum time for the “editor progress” for the undisplayed area, in milliseconds. In this process, the rendering engine calculates the layout information for the area that isn't currently displayed. Set to "0" or more.

Default: "100"


Note: Higher values for “progress stay” times can result in faster page rendering times. Lower values means the process is interrupted more often, possibly resulting in slower rendering times, but also allowing processes other than the browser engine more processor time.

fUseHTTP11PipeLine
Sets whether the browser uses pipelining in HTTP/1.1.

Default: "FALSE"

fCookieMode
Cookie processing mode:

Default: "COOKIE_NOTIFY_BEFORE_SET"

fMaxStreams
Maximum number of simultaneous TCP connections.

Default: "4"

fMaxRequestHeader
The maximum HTTP request line size, in bytes.

Default: "-1" (no limit)

fMaxRequestBody
The maximum HTTP request body size, in bytes.

Default: "-1" (no limit)

fMaxTotalCookies
The maximum number of cookies.

Default: "300"

fMaxCookiesPerDomain
The maximum number of cookies for each domain.

Default: "20"

fMaxLenPerCookie
The maximum size per cookie, in bytes.

Default: "4096"

fMaxRedirect
The maximum number of redirects.

Default: "30"

fMaxPageAuth
The maximum number of authentications per page.

Default: "-1" (no limit)

fMaxProxyAuth
The maximum time for authentication per proxy.

Default: "-1" (no limit)

fSendProxyKeepAlive
Transmit Proxy-Connection: KeepAlive header at HTTP.

Default: "TRUE"

fSendReferer
Transmit Referer header at HTTP.

Default: "TRUE"

fSendCookie
Transmit cookies.

Default: "TRUE"

fDisableFilep
Disable file protocol.

Default: "FALSE"

fAllowHTTPandHTTPS
Display HTTPS content in HTTP content, or display HTTP content in HTTPS content.

Default: "TRUE"

fBlockquoteMargin_left
The left margin when drawing a <blockquote> element, in pixels.

Default: "30"

fBlockquoteMargin_right
The right margin when drawing a <blockquote> element, in pixels.

Default: "30"

fBlockquoteMargin_top
The top margin when drawing a <blockquote> element, in pixels.

Default: "19"

fBlockquoteMargin_bottom
The bottom margin when drawing a <blockquote> element, in pixels.

Default: "19"

Pt_ARG_WEB_PRINT (write-only)

C type Pt type Default
PpPrintContext_t *, int Pointer

Set this resource to print the page. You can use the len argument of PtSetArg() to specify a combination of the following flags:

Pt_WEB_PRINT_FROM_CACHE
When printing, let the print filters read images from the image cache, to reduce the size of intermediate file.

Note: Use this option only if the filter is run locally. It's up to the client application to prevent any activation in the server while printing.

Pt_WEB_PRINT_ALL_FRAMES
Print all frames as shown on the current page.

Pt_ARG_WEB_RELOAD (write only)

C type Pt type Default
N/A N/A N/A

This is a write-only resource without any specified type. Set it to any value to reload the current page:

PtSetArg (&args[0], Pt_ARG_WEB_RELOAD, 0, 0);
PtSetResources (widget, 1, args);

Pt_ARG_WEB_SERVER

C type Pt type Default
char * String NULL

The name of a web-server profile to use, or the path and any options to the web server to start. Setting this resource starts the server; if there's a server already attached to the client, it's shut down and the new one is started.

Web-server profiles are stored in $HOME/.ph/webservers (the user profile) and /etc/photon/webservers (the global profile). The user profile is searched first. The format of this file is:

profile= server,name

In this format, server is the server executable, including path and command-line options if required, and name is the named connection that the client must use to establish a connection to the server. Profile names aren't rigidly defined, so you can use any name that suits your application if you create a custom profile. The file can contain whitespace, and lines that start with # are comments. If you need to use a comma in a command-line option, use quotation marks around the command line.

Here's an example:

# default server for "online" browsing (i.e. www)
online = vserver,VoyagerServer-2

#default server for "offline" browsing (i.e. files on disk)
offline = vserver.file -l -nVoyagerOffline,VoyagerOffline

# server profile for using Mozilla engine
mozilla = mozilla -sshared,MozillaServer

# my own webserver - an example of using ','
myserver = "/foo/bar/mywebserver -oOpt1,Opt2",MyServer

If no matching profile is found, then the string is taken literally as the server to spawn, and the setting for Pt_ARG_CLIENT_NAME is used to connect to the spawned server.


Note: You can bypass the profile lookup by beginning the Pt_ARG_WEB_SERVER string with the @ character. PtWebClient discards the @ and uses the remainder as the command to start the web server. In this scenario, the setting for Pt_ARG_CLIENT_NAME is used to connect to the server.

You can use web-server profiles to override the web server used by existing applications. For example, if an application tries to start the vserver server, you can cause it to use mozilla instead with the following profile:

# default server for old Voyager client
vserver = mozilla -sshared,MozillaServer

Note: Any options set prior to setting the resource are set back to their defaults.

For an example of using this resource, see Starting the server,” above.

Pt_ARG_WEB_SERVER_PID (read only)

C type Pt type Default
pid_t Scalar

A read-only resource that returns the PID of the web server. The value is 0 if the widget has connected to an existing server, or -1 if spawn() has failed.

Pt_ARG_WEB_SSL_RESPONSE

C type Pt type Default
PtWebClient2SSLResponse_t * Pointer NULL

A resource that's used only if you're using the SSL (Secure Sockets Layer) version on the web server. This resource is used in response to the Pt_CB_WEB_SSL_CERTNONTRUSTED and Pt_CB_WEB_SSL_ERROR callbacks. The data structure used is as follows:

typedef struct {
    char   *url;
    int     response;
} PtWebClient2SSLResponse_t;

The members include:

url
A pointer to the URL obtained from the Pt_CB_WEB_SSL_ERROR callback.
response
The type of response:

Pt_ARG_WEB_STARTUP_ERRNO (read only)

C type Pt type Default
int Scalar 0

A read-only resource that you can use to determine if the server started successfully. If the value isn't EOK, use errno to determine what went wrong. For more information, see Starting the server,” above.

Pt_ARG_WEB_STOP (write only)

C type Pt type Default
N/A N/A N/A

This is a write-only resource without any specified type. Set it to any value to stop the loading of the current page:

PtSetArg (&args[0], Pt_ARG_WEB_STOP, 0, 0);
PtSetResources (widget, 1, args);

Pt_ARG_WEB_UNKNOWN_RESP (write-only)

C type Pt type Default
PtWebClient2UnknownData_t * Pointer

Set this resource to give a response to the server after a Pt_CB_WEB_UNKNOWN callback. When the downloading begins, the browser engine calls your Pt_CB_WEB_DOWNLOAD callback.

The data structure used is as follows:

typedef struct {
    short   response;
    short   zero;
    int     download_ticket;
    char   *filename;
    char   *url;
} PtWebClient2UnknownData_t;

The members include:

response
The type of response:

download_ticket
Arbitrary data. You can set this to unique data to help you keep track of downloads, for example if several downloads happen concurrently.
filename
A pointer to the name of the file in which to save unknown data.
url
A pointer to the URL obtained from the Pt_CB_WEB_UNKNOWN callback.

Pt_ARG_WEB_VERSION (read only)

C type Pt type Default
char * String

Get the value of this resource to obtain the version of the connected web server.

Pt_CB_WEB_AUTHENTICATE

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks invoked when the server requires authentication information or when canceling a previous authentication request. To return the information, set the Pt_ARG_WEB_AUTHENTICATE resource.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_AUTHENTICATE
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebAuthenticateCallback_t structure:
typedef struct {
    short    type;
    short    action;
    char    *realm;
    char    *url;
} PtWebAuthenticateCallback_t;

The members of the PtWebAuthenticateCallback_t structure are:

type
The type of authentication used:
action
The action to take:
realm
A pointer to the realm name.
url
A pointer to the URL that requires the authentication.

Pt_CB_WEB_CLOSE_WINDOW

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks invoked when a web page with Javascript requests that its window be closed.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_CLOSE_WINDOW
reason_subtype
Not used.
event
NULL
cbdata
NULL

Pt_CB_WEB_COMPLETE

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks invoked when the page has completed loading. Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_COMPLETE
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebCompleteCallback_t structure:
typedef struct {
    char    *url;
} PtWebCompleteCallback_t;

The url member points to the URL of the page that has just completed.

Pt_CB_WEB_CONTEXT

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks invoked when the user right-clicks on the current page with the mouse.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_CONTEXT
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebContextCallback_t structure:
typedef struct {
    long        context;
    PhPoint_t   pos;
} PtWebContextCallback_t;

The members of the PtWebContextCallback_t structure are:

context
The context, which is one of:
pos
A PhPoint_t structure (see the Photon Library Reference) that contains the (x, y) coordinates of the location where the right mouse button was pressed.

Pt_CB_WEB_DATA_REQ

C type Pt type Default
PtCallback_t * Link NULL

Voyager server only.

A list of PtCallback_t structures that define the callbacks invoked when a file has been requested using the client protocol in the URL (e.g. client:about). The callback notifies the client that the server is waiting for data; to return the data, set the Pt_ARG_WEB_DATA resource.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_DATA_REQ
reason_subtype
The same as the type member in the callback data.
event
NULL
cbdata
A pointer to a PtWebDataReqCallback_t structure:
typedef struct {
    int     type;
    int     length;
    char   *url;
} PtWebDataReqCallback_t;

The members of the PtWebDataReqCallback_t structure are:

type
The type of request:
length
The maximum amount of data the server can accept, in bytes.
url
A pointer to the URL of the request.

For an example of using the client protocol, see Pt_ARG_WEB_DATA.

Pt_CB_WEB_DOWNLOAD

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks invoked when the browser begins a file download.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_DOWNLOAD
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebDownloadCallback_t structure:
typedef struct {
  int download_ticket;
  int type;
  int current;
  int total;
  char *url;
  char *message;
} PtWebDownloadCallback_t;

The members of the PtWebDownloadCallback_t structure are:

download_ticket
This is the download_ticket assigned to the download when you set the PtWebClient2UnknownData_t structure for the Pt_ARG_WEB_UNKNOWN_RESP resource. This ticket allows you to keep track of multiple downloads.
type
Can be one of:
current
The current number of bytes that have been downloaded.
total
The total expected number of bytes.
url
The URL of the downloaded file.
message
A descriptive message of the error that has occurred. The message is used only when type is Pt_WEB_DOWNLOAD_ERROR.

Pt_CB_WEB_ERROR

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks invoked if an error occurs while loading a page. This includes unknown URL protocols such as mailto:, allowing the client to handle them.


Note: The mailto links are handled by the client. This is done by watching for the mailto URL in the Pt_CB_WEB_ERROR callback.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_ERROR
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebErrorCallback_t structure:
typedef struct {
    short    type;
    short    reason;
    char    *url;
    char    *description;
} PtWebErrorCallback_t;

The members of the PtWebErrorCallback_t structure are:

type
The type of error:
reason
If type is Pt_WEB_ERROR_SERVER_EXIT, the reason member contains the terminating status of the server (use waitpid () to determine why the server terminated).

If type is Pt_WEB_ERROR_WML, an error occurred in WML content, and the reason member contains one of:

Pt_WEB_ERROR_WML_AccessDenied
Access rejection error caused by specifying an access element.
Pt_WEB_ERROR_WML_InvalidVariableReference
Incorrect variable name error.
Pt_WEB_ERROR_WML_InfiniteLoop
The WML parser has detected an infinite loop.
Pt_WEB_ERROR_WML_Unknown
An unknown WML error has occurred.
Pt_WEB_ERROR_WML_SAX
The WML parser has detected a syntax error.

For other values of type, the possible values of reason are:

-1
Unspecified or unknown error.
-2
Parameter check / consistency check failed.
-3
Low memory.
-4
Low image-cache memory.
-5
The operation was aborted.
-6
Bad header.
-8
The document contains no data.
-9
Missing service API.
-10
Missing request API.
-11
Multiple initialization.
-12
DNS failure.
-13
Connection failure.
-14
Network failure.
-15
Bad input stream.
-16
Request for data sink failed.
-17
New data sink failed.
-18
Invalid redirect.
-19
Unknown server error.
-21
Unknown document character-set encoding.
-31
Corrupt data.
-39
Helper failed.
-40
SSL not supported.
-41
Unknown URL (No URL handler could be found to process the given URL).
-400
HTTP — Bad request.
-401
HTTP — Unauthorized.
-402
HTTP — Payment required.
-403
HTTP — Forbidden.
-404
HTTP — Not found.
-405
HTTP — Method not allowed.
-406
HTTP — Not acceptable.
-407
HTTP — Proxy authentication required.
-408
HTTP — Request time-out.
-409
HTTP — Conflict.
-410
HTTP — Gone.
-411
HTTP — Length required.
-412
HTTP — Precondition required.
-413
HTTP — Request entity is too large.
-414
HTTP — Request URL too is large.
-415
HTTP — Unsupported media type.
-500
HTTP — Internal server error.
-501
HTTP — Not implemented.
-502
HTTP — Bad gateway.
-503
HTTP — Service unavailable.
-504
HTTP — Gateway time-out.
-505
HTTP — HTTP version not supported.
-1200
FTP — Server error.
-1202
FTP — Error 332.
-1203
FTP — Error 530.
description
The netfront server sets this member to a string containing a description of the error.
Voyager server does not use this member, and sets it to NULL.

Pt_CB_WEB_IMPORT_CERTIFICATE

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks invoked to inform the client whether a client certificate import operation is successful. The client initiates the import by setting Pt_ARG_WEB_IMPORT_CERTIFICATE

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_IMPORT_CERTIFICATE.
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebImportCertificateCallback_t structure:
typedef struct {
  int reason;
  char *description;
  } PtWebImportCertificateCallback_t;

The reason is one of:

If reason is Pt_WEB_IMPORT_CERTIFICATE_ERROR, description is a textual explanation for the error.

Pt_CB_WEB_METADATA

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks invoked to inform the client of metadata that was read from the page. The only metadata currently returned is the web page title.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_METADATA
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebMetaDataCallback_t structure:
typedef struct {
    char    *url;
    char    *name;
    char    *value;
} PtWebMetaDataCallback_t;

The members include the following:

url
The page URL.
name
The metadata name; currently only title is supported.
value
The metadata value.

Here's an example of using Pt_CB_WEB_METADATA to set a window widget's title to the HTML page title (web_curr_title is a global variable):

int web_title( PtWidget_t *widget, ApInfo_t *apinfo,
               PtCallbackInfo_t *cbinfo )
{
    PtWebMetaDataCallback_t *cb = cbinfo->cbdata;
    PtArg_t                 args[1];

    if ( !strcmp( cb->name, "title" ) ) {
        if ( web_curr_title )
            free( web_curr_title );
        web_curr_title = strdup( cb->value );
        PtSetArg( &args[0], Pt_ARG_WINDOW_TITLE, cb->value, 0 );
        PtSetResources( ABW_base, 1, args );
    }

    return( Pt_CONTINUE );
}

Pt_CB_WEB_NEED_SCROLL (key mode only)

C type Pt type Default
PtCallback_t * Link NULL

Voyager server only.

A list of PtCallback_t structures that define the callbacks invoked when the server requires the client to scroll the page.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_NEED_SCROLL
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebNeedScrollCallback_t structure:
typedef struct {
    short    dir;
} PtWebNeedScrollCallback_t;

where dir indicates the direction to scroll:

Pt_CB_WEB_NEW_WINDOW

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks invoked when the browser requests that a new PtWebClient widget be connected to the server so that it can display a page.

If no callback is attached, then the requested page appears in the window that the request was made (i.e. the one the user clicked in). This doesn't apply to Javascript open windows.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_NEW_WINDOW
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebWindowCallback_t structure:
typedef struct {
    PhDim_t     size;
    long        flags;
} PtWebWindowCallback_t;

The members of the PtWebWindowCallback_t structure are:

size
A PhDim_t structure (see the Photon Library Reference) that defines the dimensions of the new window.
flags
A combination of the following bits:

Pt_CB_WEB_PAGE_INFO

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks invoked when the page size or position has changed. Each callback is passed a PtCallbackInfo_t structure that contains at least:

reason
Pt_CB_WEB_PAGE_INFO
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebPageInfoCallback_t structure:
typedef struct {
    long    vheight;
    long    vwidth;
    long    height;
    long    width;
    long    ypos;
    long    xpos;
} PtWebPageInfoCallback_t;

The members of the PtWebPageInfoCallback_t structure are:

vheight
The height of the visible portion, in pixels.
vwidth
The width of the visible portion, in pixels.
height
The height of the page, in pixels.
width
The width of the page, in pixels.
ypos
The position of the right side of the page, in pixels.
xpos
The position of the top of the page, in pixels.

Pt_CB_WEB_SSL_CERTINFO

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks that are invoked when the web server has discovered an SSL connection; invoked after the handshake phase has determined the other party's identity.


Note: This callback list is invoked only if you're using the SSL version of the Voyager server (Spyrus Terisa version).

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_SSL_CERTINFO
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebSSLCertInfoCallback_t structure:
typedef struct PtWebSSLCertInfoCallback_t {
    char           *url;
    char           *cipher_kind;
    int             is_sgc;
    int             version;
    unsigned int    flags;
    struct {
        char       *serial;
        char       *subject;
        char       *issuer;
    }               certinfo;
    time_t  valid_begin, valid_end;
    char   *status;
    char   *extensions;
} PtWebSSLCertInfoCallback_t;

The members of the PtWebSSLCertInfoCallback_t structure are:

url
A pointer to the URL associated with the error.
cipher_kind
A pointer to the cipher suite used for the connection (SSL_3_RSA_WITH_RC4-128_MD5, SSL_3_RSA_WITH_RC4_40_MD5, etc.)
is_sgc
Nonzero if the connection is using the “Server Gated Cryptography” (also called “Step-Up Encryption”).
version
The version number: 2 for SSL 2.0, 0x0300 (768) for SSL 3.0, 0x0301 for TLS 1.0.
flags
Flags for future extensions (always zero in the current implementation).
certinfo.serial
A pointer to the serial number for the certificate (a hexadecimal number).
certinfo.subject, certinfo.issuer
A pointer to distinguished names of the public key being certified.
valid_begin, valid_end
The time (in seconds since 01/01/1970 0h UTC) at which the certificates became valid and invalid.
status
A pointer to the status of the certificate, represented as a string (Valid, Pending, Expired, Trusted root, Unverified, and so on).
extensions
A pointer to some additional information about the SSL connections (string).

When this callback is invoked, typically the client saves this information relative to the current SSL connection, in order to be able to display it on a subsequent user's request (usually when the user clicks on the lock).

these callbacks should return only Pt_CONTINUE; there's no need to fill up a special structure as response.

Pt_CB_WEB_SSL_CERTNONTRUSTED

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks that are invoked when the web server has discovered that the current SSL connection is made with a nontrusted certificate. Note that Voyager supports only server certificates, and not Client certificates.


Note: This callback list is invoked only if you're using the SSL version of the Voyager server (Spyrus Terisa version).

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_SSL_CERTNONTRUSTED
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebSSLCertNonTrustedCallback_t structure:
typedef struct {
  short action;
  short ncert;
  char  *url;
  char  *status;
  int   reason;
  PtWebSSLCertInfo_t info[1];
  } PtWebSSLCertNonTrustedCallback_t;

The members of the PtWebSSLCertNonTrustedCallback_t structure are:

action
One of the following:
ncert
The number of items in the info array.
url
A pointer to the URL associated with the error.
status
A pointer to the status of the certificate, represented as a string (Valid, Pending, Expired, Trusted root, Unverified, and so on).
info
An array of PtWebSSLCertInfo_t structures (see below).
reason
The reason the callback was invoked. Can be one of:

typedef struct {
  char *name;
  char *subject;
  char *issuer;
  char *cert_serial;
  char *version;
  char *signature_algorithm;
  char *basic_constraints;
  char *extended_key_usage;
  int rsa_public_key_bits;
  time_t  valid_begin, valid_end;
  } PtWebSSLCertInfo_t;
  

PtWebSSLCertInfo_t has these members:

name
A pointer to the certificate's name.
subject, issuer
A pointer to distinguished names of the public key being certified.
cert_serial
A pointer to the serial number for the certificate (hexadecimal number).
version
The version of X.509 applied to the certificate (1, 2, or 3).
signature_algorithm
The signature algorithm, which can be one of:
basic_constraints
Basic constraints for the certificate.
extended_key_usage
The extended key usage, which specifies the uses for which a certificate is valid.
rsa_public_key_bits
The number of bits in the public RSA key.
valid_begin, valid_end
The times (in seconds since 01/01/1970 0h UTC) at which the certificates became valid and invalid.

When this callback is invoked, typically the client displays a dialog giving three choices to the user:

The transaction is halted until you set the Pt_ARG_WEB_SSL_RESPONSE resource. You need to fill in a PtWebClient2SSLResponse_t structure with the URL found in the callback structure and one of these response codes:

Pt_WEB_RESPONSE_CANCEL
Abort the connection to the site.
Pt_WEB_RESPONSE_CONTINUE
Connect to the site, but don't save the certificate.
Pt_WEB_RESPONSE_OK
Connect to the site, and save the certificate.

Pt_CB_WEB_SSL_CLIENT_CERT_SELECT

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks that are invoked when the netfront server wants the browser client to display a client- certificate-selection dialog. The dialog should list the available client certificates and the user should select one certificate to be used for the current URL that requested it.

The transaction is halted until you set the Pt_ARG_WEB_SSL_RESPONSE resource. You need to fill in a PtWebClient2SSLResponse_t structure with the url found in the callback structure and you have to set the response field to the index (starting at 0) of the selected certificate.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_SSL_CLIENT_CERT_SELECT
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebSSLClientCertCallback_t structure:
typedef struct {
  int ncert;
  char *url;
  int reserved1;
  int reserved2;
  PtWebSSLCertInfo_t *info;
  } PtWebSSLClientCertCallback_t;

The members of the PtWebSSLClientCertCallback_t structure include:

ncert
The number of certificates to be displayed (the number of items in the info array).
url
The current URL that have requested the client certificates selection dialog to be displayed.
info
An array of information about the certificates. See the Pt_CB_WEB_SSL_CERTNONTRUSTED resource for a description of the PtWebSSLCertInfo_t structure.

Pt_CB_WEB_SSL_ERROR

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks that are invoked when the Voyager server has discovered an error or inconsistency with the current SSL transaction.


Note: This callback list is invoked only if you're using the SSL version of the Voyager server (Spyrus Terisa version).

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_SSL_ERROR
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebSSLErrorCallback_t structure:
typedef struct {
  short  certerr;
  short  trusted;
  char   *url;
  int    reason;
} PtWebSSLErrorCallback_t;

The members of the PtWebSSLErrorCallback_t structure are:

The transaction is halted until you set the Pt_ARG_WEB_SSL_RESPONSE resource. You need to fill in a PtWebClient2SSLResponse_t structure with the URL found in the callback structure and one of the following response codes:

Pt_CB_WEB_START

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks invoked when a page starts loading. Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_START
reason_subtype
Not used.
event
NULL
cbdata
NULL

Pt_CB_WEB_STATUS

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks that are invoked when the browser's status changes. These callbacks give you many different types of information.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_STATUS
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebStatusCallback_t structure:
typedef struct {
    short   type;
    short   zero;
    char   *desc;
    char   *url;
} PtWebStatusCallback_t;

This callback gives you many different types of information. Before performing any actions, you should first check the type and then act accordingly.

The types are:

Pt_WEB_STATUS_MOUSE
Reports when the mouse moved over links, images, etc.
Pt_WEB_STATUS_CONNECT
Reports connection-related messages.
Pt_WEB_STATUS_DEFAULT
Reported when Javascript requests the default status bar text be changed (i.e. window.defaultStatus="…"). The defaultStatus message appears when nothing else is in the status bar.
Pt_WEB_STATUS_PROGRESS
A progress message (e.g. the number of bytes downloaded).
Pt_WEB_STATUS_INFO
Reports various information. Valid INFO types are:
FORM-EDIT
Single-line text field has focus.
FORM-PASS
The password field has focus.
FORM-LIST
Single-select list has focus.
FORM-MULTILIST
Multi-select list has focus.
FORM-COMBO
Combo box has focus.
FORM-TEXTAREA
Multi-line text field has focus.
FORM-CHECKBOX
Check box has focus.
FORM-RADIO
Radio button has focus.
FORM-SUBMIT
Submit button has focus.
FORM-RESET
Reset button has focus.
LINK-IMAGE-MAP
Image map has focus.
LINK-IMAGE
Image link has focus.
LINK-TEXT
Text link has focus.
FRAMESET-DOC
Frames document has been loaded.
FORM-CURSOR-LEFT
The cursor inside a FORM control or image map has reached the leftmost position.
FORM-CURSOR-RIGHT
The cursor inside a FORM control or image map has reached the rightmost cursor position.
FORM-CURSOR-TOP
The cursor inside a FORM control or image map has reached the topmost position.
FORM-CURSOR-BOTTOM
The cursor inside a FORM control or image map has reached the bottommost cursor position.
PAGE-TOP
The page has scrolled to its topmost position.
PAGE-BOTTOM
The page has scrolled to its bottommost position.
PAGE-LEFT
The page has scrolled to its leftmost position.
PAGE-RIGHT
The page has scrolled to its rightmost position.
Pt_WEB_STATUS_PRINT
Reports print-related status (pages printed):
Pt_WEB_STATUS_CONTENTS
Reports when a single-line text field, password, or text area control receives focus on the page. The information passed in the description field is a string containing an ordinal number identifying the control on the web page, followed by a colon, followed by the contents of the text field that just got focus.

Pt_CB_WEB_UNKNOWN

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks invoked when the server has received a file that it can't display or has no external helpers that match its mimetype or file suffix. Set Pt_ARG_WEB_UNKNOWN_RESP to provide a filename or cancel the download anytime after this callback.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_UNKNOWN
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebUnknownCallback_t structure:
typedef struct {
    short    action;
    short    flags;
    char    *content_type;
    int      content_length;
    char    *url;
} PtWebUnknownCallback_t;

The members of the PtWebUnknownCallback_t structure are:

action
The action taking place:
flags
Not currently used.
content_type
A pointer to the mime content type of the file (if available).
content_length
The length of the file (-1 if unknown).
url
A pointer to the URL of the file.

Pt_CB_WEB_URL

C type Pt type Default
PtCallback_t * Link NULL

A list of PtCallback_t structures that define the callbacks that are invoked when the browser has a complete URL to be loaded. This is useful for saving internal history lists or saving URLs in hotlists.

Each callback is passed a PtCallbackInfo_t structure that contains at least the following members:

reason
Pt_CB_WEB_URL
reason_subtype
Not used.
event
NULL
cbdata
A pointer to a PtWebUrlCallback_t structure:
typedef struct {
    char   *url;
} PtWebUrlCallback_t;

Inherited resources:

If the widget modifies an inherited resource, the “Default override” column indicates the new value. This modification affects any subclasses of the widget.

Resource Inherited from Default override
Pt_ARG_ANCHOR_FLAGS PtWidget
Pt_ARG_ANCHOR_OFFSETS PtWidget
Pt_ARG_AREA PtWidget
Pt_ARG_BANDWIDTH_THRESHOLD PtBasic Not used by this class.
Pt_ARG_BASIC_FLAGS PtBasic
Pt_ARG_BEVEL_WIDTH PtWidget 0
Pt_ARG_BITMAP_CURSOR PtWidget
Pt_ARG_BEVEL_COLOR PtBasic
Pt_ARG_BEVEL_CONTRAST PtBasic
Pt_ARG_CLIENT_FLAGS PtClient
Pt_ARG_CLIENT_NAME PtClient "VoyagerServer-2"
Pt_ARG_CLIENT_REPLY_LEN PtClient
Pt_ARG_CLIENT_SEND PtClient
Pt_ARG_CLIENT_SERVER PtClient
Pt_ARG_COLOR PtBasic
Pt_ARG_CONTAINER_FLAGS PtContainer
Pt_ARG_CONTRAST PtBasic
Pt_ARG_CURSOR_COLOR PtWidget
Pt_ARG_CURSOR_OVERRIDE PtContainer
Pt_ARG_CURSOR_TYPE PtWidget
Pt_ARG_DARK_BEVEL_COLOR PtBasic
Pt_ARG_DARK_FILL_COLOR PtBasic
Pt_ARG_DATA PtWidget
Pt_ARG_DIM PtWidget
Pt_ARG_EFLAGS PtWidget
Pt_ARG_EXTENT PtWidget
Pt_ARG_FILL_COLOR PtBasic
Pt_ARG_FILL_PATTERN PtBasic
Pt_ARG_FLAGS PtWidget
Pt_ARG_HEIGHT PtWidget
Pt_ARG_HELP_TOPIC PtWidget
Pt_ARG_HIGHLIGHT_ROUNDNESS PtBasic
Pt_ARG_INLINE_COLOR PtBasic
Pt_ARG_LIGHT_BEVEL_COLOR PtBasic
Pt_ARG_LIGHT_FILL_COLOR PtBasic
Pt_ARG_MARGIN_HEIGHT PtBasic
Pt_ARG_MARGIN_WIDTH PtBasic
Pt_ARG_MAXIMUM_DIM PtWidget
Pt_ARG_MINIMUM_DIM PtWidget
Pt_ARG_OUTLINE_COLOR PtBasic
Pt_ARG_POINTER PtWidget
Pt_ARG_POS PtWidget
Pt_ARG_RESIZE_FLAGS PtWidget
Pt_ARG_STYLE PtBasic
Pt_ARG_TITLE PtContainer
Pt_ARG_TITLE_FONT PtContainer
Pt_ARG_TRANS_PATTERN PtBasic
Pt_ARG_USER_DATA PtWidget
Pt_ARG_WIDTH PtWidget
Pt_CB_ACTIVATE PtBasic
Pt_CB_ARM PtBasic
Pt_CB_BALLOONS PtContainer
Pt_CB_BLOCKED PtWidget
Pt_CB_CHILD_ADDED_REMOVED PtContainer
Pt_CB_CLIENT_CONNECTED PtClient
Pt_CB_CLIENT_EVENT PtClient
Pt_CB_CLIENT_NOT_FOUND PtClient
Pt_CB_DESTROYED PtWidget
Pt_CB_DISARM PtBasic
Pt_CB_DND PtWidget
Pt_CB_FILTER PtWidget
Pt_CB_GOT_FOCUS PtBasic
Pt_CB_HOTKEY PtWidget
Pt_CB_IS_DESTROYED PtWidget
Pt_CB_LOST_FOCUS PtBasic
Pt_CB_MENU PtBasic
Pt_CB_OUTBOUND PtWidget
Pt_CB_RAW PtWidget
Pt_CB_REALIZED PtWidget
Pt_CB_REPEAT PtBasic
Pt_CB_RESIZE PtContainer
Pt_CB_UNREALIZED PtWidget

Caveats:

Calling PtWidgetToFront() or PtWidgetToBack() on a PtWebClient widget has no effect. This is because the PtWebServer widget is in a different application. Moving a widget in one application cannot cause draw events that are emitted from a different application's region to be clipped. If you do not wish to display the PtWebClient, you should unrealize it using the PtUnrealizeWidget API call.