Knowledge Base

BSPs and drivers

Community resources

Product documentation

Questions?

How to create more than 3 qnx6 partitions on a single device?

________________________________________________________________________

Applicable Environment

________________________________________________________________________

Topic: How to create more than 3 qnx6 partitions on a single device?
SDP: 6.4.1
Target: Any supported target

________________________________________________________________________

Solution

________________________________________________________________________

The fs-qnx6 module doesn't need the partition type/number to be 177, 178, 179 unless you are auto-enumerating. So any value can be used, but you have to be sure to force the type "mount -tqnx6" if it is not one of these "known" qnx6 types (177, 178, 179). It will actually support multiple 177s, but fdisk won't allow you to create multiple 177 type partitions.

________________________________________________________________________

NOTE: This entry has been validated against the SDP version listed above. Use caution when considering this advice for any other SDP version. For supported releases, please reach out to QNX Technical Support if you have any questions/concerns.

________________________________________________________________________

Related Attachments

None Found

Please contact us with your questions or concerns.