Booting QNX Neutrino

Updated: October 26, 2022

To boot your board, follow the platform-specific instructions in the BSP User's Guide for that board.

Booting QNX Neutrino on your target board usually involves the following steps:

  1. Set hardware switches on the board, if required.
  2. Connect the board's power supply.
  3. Power up the board.

When the board has booted, you can use any built-in shell command or command residing in the OS image to test if the QNX Neutrino RTOS is running. For example, from the command line on your target system, you can type:

ls