_io_connect

Structure of a resource manager's connect message

Synopsis:

#include <sys/iomsg.h>

struct _io_connect {
    uint16_t                type;
    uint16_t                subtype;
    uint32_t                file_type;
    uint16_t                reply_max;
    uint16_t                entry_max;
    uint32_t                key;
    uint32_t                handle;
    uint32_t                ioflag;
    uint32_t                mode;
    uint16_t                sflag;
    uint16_t                access;
    uint16_t                zero;
    uint16_t                path_len;
    uint8_t                 eflag;
    uint8_t                 extra_type;
    uint16_t                extra_len;
    char                    path[1];
};

Description:

The _io_connect structure is used to describe a connect message that a resource manager receives and sends.

The members include:

type
_IO_CONNECT
subtype
The type of connection that the message concerns; one of:
  • _IO_CONNECT_COMBINE — combine with an I/O message.
  • _IO_CONNECT_COMBINE_CLOSE — combine with I/O message and always close.
  • _IO_CONNECT_OPEN
  • _IO_CONNECT_UNLINK
  • _IO_CONNECT_RENAME
  • _IO_CONNECT_MKNOD
  • _IO_CONNECT_READLINK
  • _IO_CONNECT_LINK
  • _IO_CONNECT_RSVD_UNBLOCK — place holder in the jump table.
  • _IO_CONNECT_MOUNT
file_type
The file type; one of the following (defined in <sys/ftype.h>):
  • _FTYPE_ANY — the path name can be anything.
  • _FTYPE_LINK — reserved for the Process Manager.
  • _FTYPE_MOUNT — receive mount requests on the path (path must be NULL).
  • _FTYPE_MQ — reserved for an alternate message-queue manager.
  • _FTYPE_MQUEUE — reserved for a traditional message-queue manager.
  • _FTYPE_PIPE — reserved for a pipe manager.
  • _FTYPE_SEM — reserved for a semaphore manager.
  • _FTYPE_SHMEM — reserved for a shared memory object.
  • _FTYPE_SOCKET — reserved for a socket manager.
  • _FTYPE_SYMLINK — reserved for the Process Manager.
reply_max
The maximum length of the reply message.
entry_max
The maximum number of _io_connect_entry structures that the resource manager is willing to accept. If a path could reference more than one resource manager, it returns a list of _io_connect_entry structures referring to the overlapping resource managers.
key
Reserved.
handle
The handle returned by resmgr_attach().
ioflag
The bottom two bits are modified from traditional Unix values to more useful bit flags:
  • O_RDONLY (0) is converted to _IO_FLAG_RD (0x01)
  • O_WRONLY (1) is converted to _IO_FLAG_WR (0x02)
  • O_RDWR (2) is converted to _IO_FLAG_RD | _IO_FLAG_WR (0x03)

Note that this translation can be performed without overlapping other O_* flags.

To check for permissions, use the following:

  • ioflag & _IO_FLAG_RD for read permission
  • ioflag & _IO_FLAG_WR for write permission
  • If the file is open for reading and writing, both bits are set.

The remaining values of ioflag are outside this range and are not modified. These values are:

  • O_APPEND — if set, the file offset is set to the end of the file prior to each write.
  • O_CREAT — create the file.
  • O_DSYNC — if set, this flag affects subsequent I/O calls; each call to write() waits until all data is successfully transferred to the storage device such that it's readable on any subsequent open of the file (even one that follows a system failure) in the absence of a failure of the physical storage medium. If the physical storage medium implements a non-write-through cache, then a system failure may be interpreted as a failure of the physical storage medium, and data may not be readable even if this flag is set and the write() indicates that it succeeded.
  • O_EXCL — if you set both O_EXCL and O_CREAT, open() fails if the file exists. The check for the existence of the file and the creation of the file if it doesn't exist are atomic; no other process that's attempting the same operation with the same filename at the same time will succeed. Specifying O_EXCL without O_CREAT has no effect.
  • O_LARGEFILE — allow the file offset to be 64 bits long.
  • O_NOCTTY — if set, and path identifies a terminal device, the open() function doesn't cause the terminal device to become the controlling terminal for the process.
  • O_NONBLOCK — don't block.
  • O_REALIDS — use the real uid/gid for permissions checking.
  • O_RSYNC — read I/O operations on the file descriptor complete at the same level of integrity as specified by the O_DSYNC and O_SYNC flags.
  • O_SYNC — if set, this flag affects subsequent I/O calls; each call to read() or write() is complete only when both the data has been successfully transferred (either read or written) and all file system information relevant to that I/O operation (including that required to retrieve said data) is successfully transferred, including file update and/or access times, and so on. See the discussion of a successful data transfer in O_DSYNC, above.
  • O_TRUNC — if the file exists and is a regular file, and the file is successfully opened O_WRONLY or O_RDWR, the file length is truncated to zero and the mode and owner are left unchanged. O_TRUNC has no effect on FIFO or block or character special files or directories. Using O_TRUNC with O_RDONLY has no effect.
mode
Contains the type and access permissions of the file. The type is one of:
  • S_IFBLK — block special.
  • S_IFCHR — character special.
  • S_IFDIR — directory.
  • S_IFIFO — FIFO special.
  • S_IFLNK — symbolic link.
  • S_IFMT — type of file.
  • S_IFNAM — special named file.
  • S_IFREG — regular.
  • S_IFSOCK — socket.

The permissions are a combination of:

Owner Group Others Permission
S_IRUSR S_IRGRP S_IROTH Read
S_IRWXU S_IRWXG S_IRWXO Read, write, execute/search. A bitwise inclusive OR of the other three constants (S_IRWXU is an OR of IRUSR, S_IWUSR and S_IXUSR.)
S_IWUSR S_IWGRP S_IWOTH Write
S_IXUSR S_IXGRP S_IXOTH Execute/search

The following bits define miscellaneous permissions used by other implementations:

Bit Equivalent
S_IEXEC S_IXUSR
S_IREAD S_IRUSR
S_IWRITE S_IWUSR
sflag
How the client wants the file to be shared; a combination of the following bits:
  • SH_COMPAT — this flag is ignored in the QNX implementation.
  • SH_DENYRW — prevent read or write access to the file.
  • SH_DENYWR — prevent write access to the file.
  • SH_DENYRD — prevent read access to the file.
  • SH_DENYNO — permit both read and write access to the file.
access
Contains a combination of _IO_FLAG_RD and _IO_FLAG_WR bits, which are used internally as the access permissions to allow from ioflag.
path_len
The length of the path member.
eflag
Extended flags:
  • _IO_CONNECT_EFLAG_DIR — the path referenced a directory.
  • _IO_CONNECT_EFLAG_DOT — the last component of a path was . or .. (i.e., the current or parent directory).
  • _IO_CONNECT_EFLAG_DOTDOT — the last component of a path was .. (i.e., the parent directory).
extra_type
One of:
  • _IO_CONNECT_EXTRA_NONE
  • _IO_CONNECT_EXTRA_LINK
  • _IO_CONNECT_EXTRA_SYMLINK
  • _IO_CONNECT_EXTRA_MQUEUE
  • _IO_CONNECT_EXTRA_SOCKET
  • _IO_CONNECT_EXTRA_SEM
  • _IO_CONNECT_EXTRA_RESMGR_LINK
  • _IO_CONNECT_EXTRA_PROC_SYMLINK
  • _IO_CONNECT_EXTRA_RENAME
  • _IO_CONNECT_EXTRA_MOUNT
  • _IO_CONNECT_EXTRA_MOUNT_OCB
extra_len
The length of any extra data included in the message.
path
The path that the client is trying to connect to, relative to the resource manager's mountpoint.

Classification:

QNX Neutrino