To run on currently available hardware platforms, QWF may require some non-standard hardware configuration.
The QNX Wireless Framework supports a number of hardware configurations. Not all supported modems can be used with all supported boards. The table below shows the hardware boards QWF supports, and the cellular modems and Wi-Fi modules that can be used with each board. The configurations in this table have been tested with the full range of QWF functionality, and have prebuilt reference images available.
Board | Cellular Modem | Wi-Fi Module |
---|---|---|
Freescale i.MX6Q SABRE Smart Devices | Gemalto ALS3-US | TI WiLink 8 |
Freescale i.MX6Q SABRE Smart Devices | Telit LE910 | TI WiLink 8 |
Texas Instruments DRA7xx Jacinto 6 EVM | Telit LE920 | TI WiLink 8 |
Not all modems support all QWF features. For more information, contact your QNX representative.
The following hardware configurations are operational with QWF, but have received limited testing.
Board | Cellular Modem |
---|---|
Freescale i.MX6Q SABRE Smart Devices | Multi-Tech MTD-H5 |
Freescale i.MX6Q SABRE Smart Devices | Telit LE920 |
Texas Instruments DRA7xx Jacinto 6 EVM | Multi-Tech MTD-H5 |
Texas Instruments DRA7xx Jacinto 6 EVM | Telit LE910 |
Texas Instruments OMAP5432 EVM | Multi-Tech MTD-H5 |
Texas Instruments OMAP5432 EVM | Telit LE910 |
Texas Instruments OMAP5432 EVM | Telit LE920 |
Qualcomm Snapdragon ADP | Telit LE920 |