Setting Up the Target

To set up the hardware for your QWF project, you need to:

  1. Configure your main board (see "Transferring an image to a target", and your BSP's User Guide).
  2. Configure your cellular modem and connect to it to your board.
  3. Connect the WiLink 8 module to your main board.
  4. Optionally, connect a touch display, such as a 10.1" Lilliput touch-enabled monitor, to your main board.

For information about the locations of ports, settings for switches, etc. on your board, see the manufacturer's documentation, and the QNX BSP User's Guide for your board.

DANGER
To avoid injury to yourself or damage to the board, when working with your QWF hardware, observe standard rules for working with electronic hardware devices: