Running multiple instances of the TCP/IP stack

If your system has more than one Network Interface Card, you may need to run multiple instances of the TCP/IP stack.

If the NICs are the same type, you have to specify their PCI indexes (which you can determine by using the pci -vvv command) when you start io-pkt. You can use stack instance numbers and prefixes to identify the instances of the stack. For example, let's start two stacks using the fictitious devnp-abc100 driver:

io-pkt-v4-hc -d abc100 pci=0x0
io-pkt-v4-hc -i2 -d abc100 pci=0x1 -ptcpip prefix=/sock2

In the second command line:

TCP/IP applications that wish to use the second stack must specify the SOCK environment variable. If you don't specify SOCK, the command uses the first TCP/IP stack. For example:

If you're using mount, you can add the stack instance number to the name of the manager. For example, to load into the second instance of the stack, type:

mount -Tio-pkt2