Network manager

If you want to print on a remote printer, you need to run the QNX Neutrino network manager, io-pkt*. This manager loads shared objects (DLLs) to provide the protocols and device drivers needed.

For example, to load the TCP/IP stack and a device driver suitable for Ethernet adapters compatible with NE-2000,, start io-pkt* like this:

io-pkt-v4 -dne2000
Note: If you're using a TCP/IP stack like this, you might want to configure your network interface to specify the type and number of your NIC, and the IP address and netmask for your TCP/IP interface. For more information, see TCP/IP Networking.