A typical use case is to implement a new feature in the IDE and build the executable file. After the Lauterbach launch configuration starts, through a PRACTICE script, the executable file is downloaded to the target.
The program is then started and debugged inside the Lauterbach debugger. When an error is detected and its location identified, you can right-click in any window with source code and select Edit source to return to the IDE. The IDE opens the requested file and positions the cursor on the correct line.
After you correct the error, you can set a breakpoint at the same location from the IDE. The breakpoint is communicated to the Lauterbach debugger. After you rebuild, reload, and restart the program, the processor then stops at the new breakpoint.
As with IDE projects, all source code needs to be organized within projects. If a source file isn't part of a project, the Eclipse plugin can't communicate breakpoints or provide the required functionality.
arp -s ip-addr 00-C0-8A-80-42-23
And edit the NODE=ip-addr line in config.t32 before running t32w95.exe.
sys.reset sys.up go
FLASH.RESET FLASH.Create 1. 0xFF800000--0xFF80FFFF 0x02000 AM29LV100B Byte FLASH.Create 1. 0xFF810000--0xFFFEFFFF 0x10000 AM29LV100B Byte FLASH.Create 1. 0xFFFF0000--0xFFFFFFFF 0x02000 AM29LV100B Byte flash.erase 0xfff00000--0xfff1ffff flash.program 1. data.load h:\ipl.bin # SREC Format flash.program
http://community.qnx.com/sf/frs/do/viewRelease/projects.ide/frs.ide.jtag_utilities
;Default startup program for TRACE32 ; ;This startup program can be modified according to your needs. ;choose hex mode for input radix hex ;Add some extra buttons to the toolbar menu.rp ( add toolbar ( separator toolitem "Source/List" "list" "Data.List" toolitem "Memory Dump" "dump" "Data.dump" toolitem "Register" "reg" "Register /SpotLight" separator toolitem "Watch" ":var" "Var.Watch" toolitem "Stack" ":varframe" "Var.Frame /l /c" toolitem "Automatic Watch" ":varref" "Var.Ref" separator toolitem "List Breakpoints" "break" "Break.List" toolitem "List Symbols" "symbols" "sYmbol.Browse" separator ) ) ;Recall and Define History File autostore , history enddo