/pps/qnxcar/sensors

Publishers: Virtual Mechanic
Subscribers: Climate Control; Virtual Mechanic

Note: This is the only PPS object that Virtual Mechanic uses. Status values for all components are read from this object. The only case where Virtual Mechanic writes to /pps/qnxcar/sensors is when turning the ABS brakes setting (brakeAbsEnabled) on or off.

Attributes

Attribute	Data type	Values	Default	Caution status condition	Alert status condition
`brakeAbsEnabled`	Boolean	`true` \| `false`	`true`	n/a	n/a
`brakeAbsFrontLeft`	Boolean	`true` \| `false`	`true`	`false`	n/a
`brakeAbsFrontRight`	Boolean	`true` \| `false`	`true`	`false`	n/a
`brakeAbsRearLeft`	Boolean	`true` \| `false`	`true`	`false`	n/a
`brakeAbsRearRight`	Boolean	`true` \| `false`	`true`	`false`	n/a
`brakeFluidLevel`	Number	0 - 100%	90	<=80	<=70
`brakePadWearFrontLeft`	Number	0 - 100%	100	<=40	<=20
`brakePadWearFrontRight`	Number	0 - 100%	100	<=40	<=20
`brakePadWearRearLeft`	Number	0 - 100%	50	<=40	<=20
`brakePadWearRearRight`	Number	0 - 100%	65	<=40	<=20
`cameraRearviewActive`	Boolean	`true` \| `false`	`false`	n/a	n/a
`coolantLevel`	Number	0 - 100%	100	<=80	<=70
`engineOilLevel`	Number	0 - 100%	95	<=85	<=75
`engineOilPressure`	Number	>=0 (PSI)	100	<=85	<=75
`fuelLevel`	Number	0 - 100%	75	<=25	<=10
`lightHeadLeft`	Boolean	`true` \| `false`	`true`	`false`	n/a
`lightHeadRight`	Boolean	`true` \| `false`	`true`	`false`	n/a
`lightTailLeft`	Boolean	`true` \| `false`	`false`	`false`	n/a
`lightTailRight`	Boolean	`true` \| `false`	`true`	`false`	n/a
`rpm`	Number	>=0	2800	>=6250	>=7000
`speed`	Number	>=0	0	n/a	n/a
`tirePressureFrontLeft`	Number	>=0 (PSI)	31	<=26, >=36	<=24, >=38
`tirePressureFrontRight`	Number	>=0 (PSI)	31	<=26, >=36	<=24, >=38
`tirePressureRearLeft`	Number	>=0 (PSI)	25	<=26, >=36	<=24, >=38
`tirePressureRearRight`	Number	>=0 (PSI)	32	<=26, >=36	<=24, >=38
`tireWearFrontLeft`	Number	0 - 100%	90	<=30	<=20
`tireWearFrontRight`	Number	0 - 100%	90	<=30	<=20
`tireWearRearLeft`	Number	0 - 100%	70	<=30	<=20
`tireWearRearRight`	Number	0 - 100%	70	<=30	<=20
`transmissionClutchWear`	Number	0 - 100%	70	<=60	<=40
`transmissionFluidLevel`	Number	0 - 100%	85	<=80	<=70
`transmissionFluidTemperature`	Number	-273.15 - 1000 (degrees F)	185	>=215	>=240
`transmissionGear`	String	p,r,n,d,1,2,3,4,5,6,7	p	n/a	n/a
`washerFluidLevel`	Number	0 - 100%	20	<=20	<=10

Examples

Set the fuel level to 15%:

echo fuelLevel:n:15 >> /pps/qnxcar/sensors

Turn ABS off:

echo brakeAbsEnabled:b:false >> /pps/qnxcar/sensors