Pattern scanning and processing language (POSIX)


gawk [-F ere] [-v var=val] [-W GNU_extension...]
     [--] program [argument]...

gawk [-F ere] -f progfile [-v var=val]
     [-W GNU_extension...] [--] [argument]...

Runs on:



-f progfile
Specifies the name of the gawk program, progfile, which contains gawk statements. You can also specify the gawk program as a single argument in the command line by using quotes.
-F ere
Define the input field separator (FS) to be the extended regular expression ere, before any input is read.
-v var=val
Assign the value val to variable var before execution of the program begins.
-W GNU_extension[,GNU_extension]...
Specify a GNU extension. Multiple -W options may be specified, or multiple extensions may be listed in a single -W option if they are separated by commas (or white space if the entire option argument has been quoted from the command line). You can also specify these options using the GNU long options shown in parentheses below.

The GNU extended options are:

compat (--compat)
Run in compatibility mode. In compatibility mode, GNU gawk behaves identically to UNIX awk; none of the GNU-specific extensions are recognized.
copyleft (--copyleft)
copyright (--copyright)
Print the short version of the GNU copyright information message on the error output.
dump-variables[=file] (--dump-variables[==file])
Print a sorted list of global variables, their types, and final values to file. If you don't specify a file, gawk prints this list to the file named awkvars.out in the current directory.
exec=file (--exec=file)
Similar to -f: read the program text from file. There are two differences:
  • This option terminates option processing; anything else on the command line is passed on directly to the gawk program.
  • Command-line variable assignments of the form var=value aren't allowed.
gen-po (--gen-po)
Analyzes the source program and generates a GNU gettext Portable Object file on standard output for all string constants that have been marked for translation.
help (--help)
usage (--usage)
Print a relatively short summary of the available options on the error output.
lint[=fatal] (--lint[=fatal]
Provide warnings about constructs that are dubious or nonportable to other awk implementations. If you specify fatal, lint warnings become fatal errors.
lint-old (--lint-old)
Warn about constructs that aren't available in the original version of awk from Version 7 Unix.
non-decimal-data (--non-decimal-data)
Enable automatic interpretation of octal and hexadecimal values in input data.
Turn on compatibility mode, with the following additional restrictions:
  • \x escape sequences are not recognized.
  • The synonym func for the keyword function is not recognized.
  • The operators ** and **= cannot be used in place of ^ and ^=.
profile[=file] (--profile[=file])
Enable profiling of awk programs. By default, profiles are created in a file named awkprof.out. The optional file argument lets you specify a different file name for the profile file.
re-interval (--re-interval)
Allow interval expressions in regular expressions.
source=program-text (--source=program-text)
Use program-text as AWK program source code. This option allows the easy intermixing of library functions (used via the -f option) with source code entered on the command line. It is intended primarily for medium to large size AWK programs used in shell scripts. The -W source= form of this option uses the rest of the command-line argument for program-text; no other options to -W are recognized in the same argument.
traditional (--traditional)
Disable all gawk extensions.
version (--version)
Print version information for this particular copy of gawk on the error output. This is useful mainly for knowing if the current copy of gawk on your system is up to date with respect to whatever the Free Software Foundation is distributing.
Indicates end of options, in case subsequent item begins with dash (-) and is not an option.
The text of an awk program that contains awk statements, assuming no -fprogfile option has been specified. The awk program can either be in a file progfile or specified in the command line, taking into account the quoting rules of the shell.
You can intermix either of these two types of arguments:
The pathname of a file that contains the input to be read; the input is matched against the set of patterns in the program. If you don't specify any files containing input, or if you specify the dash character (-), the standard input is used.
You can pass expressions in the form name=value to gawk, where each instance of name represents the name of an gawk variable. Each such variable assignment occurs just prior to the processing of the following file, if any. The assignment is done before the file argument is executed, and after the BEGIN action — if any — of that file.


The gawk utility executes programs written in the awk programming language; this language specializes in manipulating textual data. An awk program is a sequence of patterns and corresponding actions. When input matching a specified pattern is read, the action associated with that pattern is carried out. The gawk shipped with QNX is a port of GNU awk.

Note: This utility is subject to the GNU Public License (GPL). We've included it for use on development systems.

The gawk utility interprets each input line as a sequence of fields, where, by default, a field is a string of nonblank characters. You can change this default white space delimiter by using the builtin variable, FS (see Variables), or the -F ere option. The gawk utility denotes the first field in a line $1, the second $2, and so forth. A $0 refers to the entire line; setting any other field causes $0 to be reevaluated.

Each input line matched by the patterns and each input line for the getline function (see the section on Functions) is limited to 1024 bytes.

Programs in awk are composed of statements of the form:

pattern { action }

You can omit either the pattern or the action (that includes the enclosing braces). In the following sections of this description, blank characters between operators and reserved words are ignored, unless otherwise specified. All blank characters are significant inside literal strings and after a function name. A missing pattern matches any line of input, and a missing action is equivalent to an action that writes the matched line of input to standard output.

An awk program follows this general procedure:

  1. Starts by executing the actions associated with all BEGIN patterns (BEGIN patterns are described in the section Special patterns — BEGIN and END).
  2. Processes each file argument in turn — or standard input if no files are specified — by cyclically reading and saving data from the file until a record separator is seen, evaluating each pattern in the script and executing that action for patterns that evaluate to true (the default record separator is the newline character).
  3. Executes the actions associated with all END patterns.


Expressions describe computations used in patterns and actions. Expressions in awk are constructed from such operators as conditionals, logicals, arithmetics, assignments, subscripts, and fields. Expressions take on string or numeric values appropriate to the context. The following table displays valid expressions in groups, starting from the highest priority.

In this table, the abbreviation expr represents any expression. The abbreviation lvalue represents any entity that you can assign a value to (i.e. on the left side of an assignment operator).

Syntax Description
(expr) Grouping
$expr References field number expr
++lvalue Preincrement lvalue by 1
--lvalue Predecrement lvalue by 1
lvalue++ Postincrement lvalue by 1
lvalue-- Postdecrement lvalue by 1
expr ^ expr Exponentiation
! expr Logical not
+ expr Unary plus
- expr Unary minus
expr * expr Multiplication
expr / expr Division
expr % expr Integer modulus
expr + expr Addition
expr - expr Subtraction
expr expr String concatenation of two exprs
expr < expr Less than
expr <= expr Less than or equal to
expr != expr Not equal to
expr == expr Equal to
expr > expr Greater than
expr >= expr Greater than or equal to
expr1 ~ expr2 1 if expr1 matches the ERE described by expr2
expr1 !~expr2 1 if expr2 doesn't match the ERE described by expr2
expr in array 1 if array[expr] exists
(index) in array Handles multidimensional arrays
expr && expr Logical AND
expr || expr Logical OR
expr?expr:expr Conditional expression — evaluates first expr and if nonzero evaluates to the second expr; otherwise to the third expr
lvalue ^= expr Raise lvalue to exponent expr
lvalue %= expr Assign lvalue%expr to lvalue
lvalue *= expr Multiply lvalue by expr
lvalue /= expr Divide lvalue by expr
lvalue += expr Add expr to lvalue
lvalue -= expr Subtract expr from lvalue
lvalue = expr Assign expr to lvalue

All of the arithmetic operators are based on the C Standard. The conditional expression returns either strings or numbers, depending on the input expressions. Only one of the alternative expressions is evaluated.

In addition to the descriptions in the previous table, an expression can also be a floating-point number, a literal string enclosed by double quotation marks ("), or a variable name.

You can treat a variable or a field as a number or a string at any time, depending on its current usage. There are no explicit conversions between numbers and strings. To force an expression to be treated as a number, you add zero to it. To force an expression to be treated as a string, concatenate the null string ("") to it. Variables and fields are set by the assignment statement:

The type of expression determines the resulting variable type.

The assignment includes these arithmetic assignments:

   +=   -=   *=   /=   %=   ^=   ++   --

each of which produces a numeric result. The left-hand side of an assignment and the target of increment and decrement operators can be one of the following:

This is indicated by the following BNF grammar:

| $expr
| <variable> [ <index> ]

A valid array index consists of one or more comma-separated expressions, with one expression for each dimension of the array. Because awk arrays behave as associative memories, an array index can be any string. Since awk arrays are really one-dimensional, a multidimensional array index is converted to a one-dimensional index by concatenating all expressions, each separated from the other by the value of the SUBSEP variable (see Variables).

Thus, the following two index operations are equivalent:

A multidimensioned index used with the in operator must be parenthesized. The in operator, which tests for the existence of a particular array element, doesn't cause that element to exist. But any other reference to a nonexistent array element automatically creates it.

Comparisons are made numerically if both operands are numeric; otherwise, operands are converted to strings as required and a string comparison is made.

In the table of awk expressions, operators of higher precedence are grouped before those of lower precedence. In expression evaluation, higher precedence operators are evaluated before lower precedence operators. All operators associate to the left except for the assignment operators, the conditional operator (?:), and the exponentiation operator (^). Because the concatenation operation is represented by adjacent expressions rather than an explicit operator, you often need to use parentheses to enforce the proper evaluation precedence.


You can use variables in an awk program by assigning to them. They don't need to be declared — uninitialized variables have the value of the empty string, which has a numeric value of zero. All variables, including fields, are treated as string variables unless they're used in a clearly numeric context.

Field variables are designated by a $, followed by a number or a numerical expression.

You can create new field variables by assigning a value to them. References to nonexistent fields — i.e. fields after $(NF) — produce the null string. But, assigning to a nonexistent field (e.g. $(NF+2)=5) increases the value of NF, creates any intervening fields with the null string as their values, and causes the value of $0 to be recomputed, with the fields being separated by the value of OFS.

This table shows other special variables that gawk sets:

Variable Meaning
ARGC The number of elements in the ARGV array
ARGV Array of command-line arguments — excluding options and the program argument — numbered from zero to ARGC-1
FILENAME Pathname of the current input file
FNR Ordinal number of the current record in the current file
FS Input field separator regular expression; space by default
NF Number of fields in the current record
NR Ordinal number of the current record from the start of input
OFMT Print statement output format for numbers; "%.6g" by default
OFS Print statement output field separation; space by default.
ORS Print statement output record separator; newline by default
RLENGTH Length of string matched by the match function
RS The first character of the string value of RS is the input record separator; newline by default. If RS is null, records are separated by blank lines, and newline is always a field separator, regardless of the value of FS
RSTART Starting position of string matched by match function, numbering from 1. This is always equivalent to the return value of the match function
SUBSEP Subscript separator string for multidimensional arrays; the default value is \034

You can modify or add to the arguments in ARGV; you can alter ARGC. As each input file ends, gawk treats the text non-NULL element of ARGV, up through the current value of ARGC-1, as the name of the next input file. Thus, setting an element of ARGV to null means that it isn't treated as an input file. A dash (-) filename indicates the standard input. If an argument contains an equals sign (=), this argument is treated as an assignment rather than as a file argument.


The structure of a pattern is specified by the following BNF grammar:

|<simple pattern>
|<simple pattern>, <simple pattern>
<simple pattern>:
<simple expression>

In other words, a pattern is any valid expression, or an extended regular expression. In addition, a pattern can be a range specified by two of these patterns separated by a comma, or can be one of the two special patterns BEGIN or END.

Special patterns — BEGIN and END

The gawk utility recognizes two special patterns, BEGIN and END. BEGIN is matched once and its associated action is executed before the first line of input is read and before command-line assignment is done. END is matched once and its associated action is executed after the last line of input has been read. These two patterns have associated actions.

BEGIN and END don't combine with other patterns. Multiple BEGIN and END patterns are allowed. The actions associated with the BEGIN patterns are executed in the order specified in the program, as are the END actions. An END pattern can precede a BEGIN pattern in a program.

If a program consists of: Then:
Only BEGIN blocks gawk exits without reading its input when the last statement in the BEGIN block is executed.
Only END blocks or only BEGIN and END blocks The input is read before the statements in the END block(s) are executed.

Regular expressions

The gawk utility uses the extended expression notation, except that it lets you use C-language conventions for escaping special characters within the extended regular expressions:

Escape Meaning
\b Backspace
\f Form feed
\n Newline
\r Carriage return
\t Tab
\ddd 1-3 digit octal value ddd

If ere is an extended regular expression, the pattern:

matches any line of input that contains a substring specified by the regular expression. You can limit a regular expression comparison to a specific field or string by using one of the two regular expression matching operators, ~ and !~. For example:

$4 ~ /ere/

matches any line in which the fourth field matches the regular expression /ere/.

This pattern:

$4 !~ /ere/

matches any line in which the fourth field doesn't match the regular expression /ere/.

You can use an extended regular expression to separate fields by using the -F ere option, or by assigning the expression to the builtin variable FS. The default field separator is a single space character. The following describes the behavior of FS:

  1. If FS is a single character:
    1. If FS is space, skip leading and trailing blanks; fields are delimited by sets of one or more blanks.
    2. If FS is any other character c, fields are delimited by each single occurrence of c.
  2. Otherwise, if FS is more than one character, FS is considered to be an extended regular expression. Each occurrence of the string matching the extended regular expression delimits fields.

Pattern ranges

A pattern range consists of two patterns separated by a comma; in this case, the action is performed for all lines between an occurrence of the first pattern and the following occurrence of the second pattern, inclusive. At this point, the pattern range can be repeated starting at input lines subsequent to the end of the matched range.

Expression patterns

An expression pattern is considered to match — or be true — when the expression evaluates to a nonzero numeric value. Otherwise, the pattern is considered false.


An action is a sequence of statements. A statement can be one of the statements listed as follows. In this list, optional elements are shown in square brackets ([ ]) and keywords are shown in a constant-width typeface.

Any single statement can be replaced by a statement list enclosed in braces (i.e. {}). The statements in a statement list are separated by newline characters or semicolons. The symbol # anywhere in a program line — in strings or EREs — begins a comment that is terminated by the end of the line.

Statements are terminated by semicolons or newline characters. You can split a long statement across several lines by ending each partial line with a backslash; newline characters without backslashes can follow:

For example:

{ print $1,
        $2 }

String constants are surrounded by double quotes ("string"). A string expression is created by concatenating constants, variables, field names, array elements, functions, and other expressions.

The expression acting as the conditional in an if statement is evaluated, and if it is nonzero and nonnull, the next statement is executed. Otherwise, if else is present, the statement following the else is executed.

The while, do...while, for, break, and continue statements are based on the C Standard, except in the case of for ( variable in array ), which iterates assigning each index of array to variable in order. The for statement has a form that processes each element in an array. The order of processing is unspecified.

The awk language supplies arrays that are used for storing numbers or strings. Arrays don't have to be declared, and their sizes change dynamically. The subscripts, or element identifiers, are strings that provide a type of associative array capability. Subscripts can't themselves be arrays.

The delete statement removes an individual array element. Thus, the following code deletes an entire array:

for (index in array)
    delete array[index]

The next statement causes all further processing of the current input line to be abandoned.

The exit statement invokes all END actions in the order in which they occur in the program source. A next statement inside an END also terminates the program and can optionally set the utility's exit status.

Output statements

Both print and printf statements send their output to standard output by default. The output is written to the location specified by redirection-expression, if one is supplied, as follows:

In all cases, the expression is evaluated to produce a string that's used as a full pathname to write into (for > or >>) or as a command to be executed (for |). Using the first two forms, if the file of that name isn't currently open, it is created if necessary, opened, and using the first form, truncated. The output is then appended to the file. Subsequent calls in which expression evaluates to the same name simply append output to the file; the file remains open until closed.

The third form writes output onto a stream compatible with popen(). If no stream is currently open, the stream is created with the same command name; the stream created is compatible with popen() invoked with a mode of w. Subsequent calls write output to the existing stream if, in those calls, expression evaluates to the same command name as a stream that's currently open. The stream is closed as if pclose() were called with an expression that evaluates to the same command name.

The print statement writes the value of each expression argument to the indicated output stream, separated by the current output field separator (see OFS in the table of gawk variables), and terminated by the output record separator (see ORS in the table). String expressions are written out as is; numeric expressions are written out as if produced by printf using a format that is the string value of the variable OFMT. The expression-list is a comma-separated list of expressions. An empty expression-list stands for the whole input line ($0).

With printf, the expressions are printed according to the specified format. A format argument is required — all other arguments in expression-list are optional. The string value of the expression format is interpreted in a manner similar to the C function printf(), as follows. In the format string, format specifications begin with the single character %, and can optionally include the following three modifiers:

Modifier Meaning
- Left-justify the expression in its field
width Pad-left to this width as needed; a leading 0 pads with zeros
.prec Maximum string width, or digits to right of decimal point

Format specifications are terminated by any other character. For each format specification that consumes an argument, the next argument from expression-list is evaluated and converted to the appropriate type (string, integer, or floating point). Both print and printf can output at least 1024 bytes.

The format-specification characters that gawk uses are as follows:

Character Interpretation
c If the argument is numeric, print a character; if the argument is a string, print only the first character
d Decimal integer
e Exponential notation: [-]d.ddddddE[+-]dd
f Floating point: [-]ddd.dddddd
g Shorter of e or f notations; suppress nonsignificant zeros
o Unsigned octal number
s String
x Unsigned hexadecimal number
% Print a %; no argument consumed


The awk language has a variety of builtin functions: arithmetic, string, input/output, and general.

Arithmetic Functions:

The arithmetic functions, except for int, are based on the C Standard.

Return the arctangent of y/x.
Return the cosine of x, where x is in radians.
Return the sine of x, where x is in radians.
Return the exponential function of x.
Return the natural logarithm of x.
Return the square root of x.
Truncate its argument to an integer; truncated toward 0 when x>0.
Return a random number n, such that 0<=n<1.
Set the seed value for rand() to expr or to the time of day if expr is omitted. The previous seed value is returned.

String functions:

Behaves like sub (see below), except that it replaces all occurrences of the regular expression in $0 or in the in argument, when specified.
index(s, t)
Returns the position, in characters, numbering from 1, in string s where string t first occurs, or zero if it doesn't occur at all.
length[ (s) ]
Returns the length, in characters, of its argument taken as a string, or of the whole, $0, if there is no argument.
match(s, ere)
Returns the position, in characters, numbering from 1, in string s where the extended regular expression ere occurs, or zero if it doesn't occur at all. RSTART is set to the starting position (which is the same as the returned value), zero if no match is found; RLENGTH is set to the length of the matched string, -1 if no match is found.
split(s, a[, fs])
Splits the string s into array elements a[1], a[2],..., a[n], and returns n. The separation is done with the extended regular expression fs or with the field separator FS if fs isn't given.
sprintf(fmt, expr, expr, ...)
Formats the expressions according to the printf format given by fmt and returns the resulting string.
sub(ere, repl[, in])
Substitutes the string repl in place of the first instance of the extended regular expression ere in string in and returns the number of substitutions. If in is omitted, gawk uses the current record ($0).
substr(s, m[, n])
Returns the n-character substring of s that begins at position m, numbering from 1. If n is missing, the length of the substring is limited by the length of the string s.

All of the preceding functions that take ere as a parameter expect a pattern or a string valued expression that is a regular expression.

Input/Output and general functions:

Closes the file or pipe named expression.
expression | getline [var]
Pipes the output of the command string given by expression into getline; each successive call to getline returns the next line of output from expression. This construct has the behavior of popen() called with a mode of r. If var isn't specified, $0 and NF are set; if var is specified, var is set.
Sets $0 to the next input record from the current input file. This form of getline sets NF, NR, and FNR variables.
getline < expression
Sets $0 to the next record from the pathname expression. This form of getline sets the NF variable.
getline var
Sets variable var to the next input record from the current input file. This form of getline sets FNR and NR variables.
getline var < expression
Sets var from the next record of expression, treated as a pathname. This form of getline doesn't set the NF, NR, and NFR variables.
system (expression)
Executes the command given by expression in a manner consistent with the system() function and returns the exit status.

All forms of getline return 1 for successful input, zero for end of file, and -1 for an error.

User-defined functions

The awk language also provides user-defined functions. You can define such functions — in the pattern position of a pattern-action statement — as:

A function can be referred to anywhere in an awk program. In particular, a function call can precede its definition. The scope of a function is global.

Function arguments are passed by value if scalar and by reference if an array name. Argument names are local to the function; all other variable names are global. The number of parameters in the function definition doesn't have to match the number of parameters in the function call. Excess formal parameters can be used as local variables. If fewer arguments are supplied in a function call than are in the function definition, the extra receiving parameters are left uninitialized.

When you're invoking a function, remember that no white space is allowed between the function name and the opening parenthesis. Function calls can be nested and can be recursive. You can use the return statement to return a value.

In the function definition, newlines are optional before the opening brace and after the closing brace. Function definitions can appear anywhere in the program where a pattern-action statement is allowed. In a function call, no white space is allowed between the function name and the opening parenthesis that begins the function parameter list.

Sample awk programs:

Note that the following are sample awk programs, not complete command lines.

Write to the standard output all input lines for which field 3 is greater than 5:

$3 > 5

Print every tenth line:

(NR % 10) == 0

Print any line with a substring that matches the regular expression:

/(G|D) (2[0-9][[:alpha:]]*)/

Print the second to last field and the last field in each line; separate the fields by a colon:

{OFS=":";print $(NF-1), $NF}

Print the line number and number of fields in each line. The three strings representing the line number, the colon, and the number of fields are concatenated and the resulting string is written to standard output:

{print NR ":" NF}

Print lines that are longer than 72 characters:

length $0 > 72

Print the first two fields in opposite order separated by the OFS:

{ print $2, $1 }

Same as above, with input fields separated by a comma or space and tab characters, or a combination of all these:

BEGIN  {FS = ",[ \t]*|[ \t]+" }
       { print $2, $1 }

Add up the first column, and print the sum and the average:

    {s += $1 }
END {print "sum is ", s, " average is", s/NR}

Print the fields in reverse order, one field per line (i.e. many lines out for each line in):

{ for (i = NF; i > 0; --i) print $i }

Print all lines between occurrences of the strings start and stop:

/start/, /stop/

Print all lines whose first field is different from the first field of the previous line:

$1 != prev { print; prev = $1 }

Simulate echo:

  for (i = 1; i < ARGC; ++i)
    printf "%s%s", ARGV[i], i==ARGC-1?"\n":" "

If there's a file named myfile that contains page headers of the form:

Page #

and a file named program that contains:

/Page/{ $2 = n++; }
{ print }

then the command line:

gawk -f program n=5 myfile

would print the file myfile, filling in page numbers starting at 5.


Print the file myfile, which contains page references, filling in page numbers starting at 5:

gawk '/Page/{ $2=n++; } { print }' n=5 myfile


By default, input files are text files that are read in order. You can modify either variable ARGV or variable ARGC to place this default file processing under program control.

The nature of the output files depends on your awk program.

Environment variables:

Defines the search path when looking for commands executed by system(expr), or input and output pipes.

Exit status:

All input files were processed successfully.
An error occurred.

Contributing author:


See also:

python, sed

Dale Dougherty, sed & awk, O'Reilly and Associates, 1990.

A.V. Aho, Brian W. Kernighan, and Peter J. Weinberger, The AWK Programming Language, Addison-Wesley, 1988.