`devi-hirun`

Photon "high-runner" input manager

Syntax:

devi-hirun [-bdglPr] [-v[v]...]
           protocol [protocol_opts...]
           [protocol [protocol_opts...]]...
           [device [device_opts...]]...
           [filter [filter_opts...]]...

Options:

When you use a devi-* driver for a touchscreen, you need a calibration file. The calibration file is generated from the output produced by the calib utility:

calib > calib_file.txt

For more information, see the calib utility in the Utilities Reference, and Touchscreens in the Neutrino User's Guide.

-b

Prevent the use of the Ctrl-Alt-Shift-Backspace keychord to exit Photon (permitted by default).

-d device

Device (default: /dev/photon or $PHOTON).

-g input_group

Input group (default: 1).

-l

List the internal modules. Modules are listed in the following format:

module name | date last compiled | revision | class

where class is one of: D -- Device, P -- Protocol, or F -- Filter:

-P

Disable the Photon interface (by default, start Photon).

-r

Start the resource manager interface. Use this option only if you're not using Photon.

-v[v]...

Verbose output. More v characters cause more verbosity.

protocol [protocol_opts...]

The protocols and their options are:

kbd [options]

Keyboard scan codes (connected to primary keyboard).

Options:

-f filename

Create the given file and collect all data passed to the filter level (for debug only).

-k rate[,delay]

Keyboard rate (Hz), delay (ms). The default is 30Hz, 500ms).

The -k option works only in conjunction with the kbddev device module.

-p filename

Create and open the given FIFO file and duplicate all data passed to the filter level (for debug only)

-R

Don't reset the device while resetting the protocol.

-r

Reset the keyboard (the default).

-s

The device driver should supply valid symbols.

Devices supported: fd, kbddev

msoft [-3] [-b baud] [-i][-R]

Microsoft-compatible mouse protocol (serial).

Options:

-3: Microsoft 3-button mouse.
-b baud: Baud rate for serial device (default: 1200).
-i: Intellimouse mice with wheels.
-R: Don't reset mouse (default: reset mouse).

Devices supported: fd, uart

msys [-b baud] [-R]

Mouse Systems mouse protocol (used by Logitech).

Options:

-b baud: Baud rate for serial device (default: 1200).
-R: Don't reset the mouse (default: reset it).

Devices supported: fd, uart

ps2

IBM PS/2 mouse protocol.

Devices supported: mousedev

All serial devices use 8 data bits, 1 stop bit, and no parity.

device [device_opts...]

The devices and their options are:

fd [-d device] [-s]

Opens a device via open().

Options:

-d device: The device to open fd on (default: /dev/ser1).
-P: The processing priority of the input event.
-s: The input interface is serial (i.e. the module can use devctl() commands that are specific to a serial port).

kbddev [options]

PS2 keyboard.

Options:

-i irq: IRQ (default: 1).
-f filename: Create the given file and collect all data passed to the protocol level (for debug only).
-P: The processing priority of the keyboard event.
-p ioport,add: The port (default: 0x60) and a value to add to get the status (default: 4).
-r: Reset the keyboard port. This is useful on hardware with no BIOS (e.g. PowerPC ).

mousedev [options]

PS2 mouse.

Options:

-f filename

Create the given file and collect all data passed to the protocol level (for debug only).

-i irq

IRQ (default: 12).

-P

The processing priority of the mouse event.

-p ioport,add

The port (default: 0x60) and a value to add to get the status (default: 4).

-r

Reset the mouse port. This is useful on hardware with no BIOS (e.g. PowerPC ).

If both kbddev and mousedev options are specified in the command line and non-standard port numbers are used, the same port number values have to be defined for each module.

uart [options]

Accesses 8250/16450/16550 UART directly.

Options:

-1: Use COM1.
-2: Use COM2.
-i irq: IRQ for serial device (default: 4).
-P: The processing priority of the input event.
-p ioport: Port of serial device (default: 3f8).

filter [filter_opts...]

The filters and their options are:

keyboard [-k kbd_file]

Translate scan codes to Unicode.

Options:

-k kbd_file: The file to use to map the keyboard to support international languages or alternate layouts, such as Dvorak. The default location for these files is /usr/photon/keyboard; to create a keyboard mapping, use mkkbd.

rel [options]

Filter and compress relative coordinate "mouse" events.

Options:

-a value: The wheel-acceleration parameter (default 10); the higher this value, the faster the mouse wheel acceleration.
-G gain: Motion multiplier (default: 1).
-l: ("el") Swap the right and left buttons.
-T threshold: Speed-doubling threshold in mickeys (100).
-x: Reverse X.
-y: Reverse Y.

Description:

The devi-hirun driver serves as the "high-runner" (i.e. the most likely) input driver for Photon. The inputtrap utility detects drivers and starts devi-hirun.

The devi-hirun driver is responsible for taking data from an input device such as a mouse, or keyboard, interpreting the data, and then "doing" something with it. The default behavior is to package the data as an event and inject it into the Photon event space.

The devi-hirun driver uses a layered approach to driver design:

filter layer
protocol layer
device layer

At each layer, data is interpreted/modified and passed up to the next layer until it's injected as an event into the Photon event space.

For each device devi-hirun talks to, there's a separate path through the three layers called an event bus line. An event bus line consists of modules, one representing each layer, linked together by a software bus. As data is passed up the layers via the bus, the data is manipulated by each module into a format recognizable by the next layer's module and so on.

It's important to note that you can run as many instances of devi-hirun as you want, one for each device. Or you can run one devi-hirun for all the devices. Choosing which scenario to use is mostly a matter of convenience.

Examples:

If inputtrap detects a serial Microsoft mouse and a keyboard interfaced through the file descriptor provided by opening /dev/kbd, it invokes devi-hirun like this:

devi-hirun kbd fd -d/dev/kbd msoft fd &

If inputtrap detects a PS/2 mouse interfaced through the auxiliary port on the keyboard controller (mousedev) and a keyboard interfaced through the primary keyboard port on the keyboard controller (kbddev), it invokes devi-hirun like this:

devi-hirun kbd kbddev ps2 mousedev &

devi-hirun

`devi-hirun`

Syntax:

Runs on:

Options:

protocol [protocol_opts...]

device [device_opts...]

filter [filter_opts...]

Description:

Examples:

See also: