`PgLayerCaps_t`

Capabilities for a layer

Synopsis:

typedef struct {
    unsigned int    format;
    long            owner;

    unsigned int    caps;
    unsigned int    alpha_caps;
    unsigned int    alpha_combine_caps;
    unsigned int    chroma_caps;

    int     max_data_width;
    int     max_data_height;

    int     max_src_width;
    int     max_src_height;

    int     max_dst_width;
    int     max_dst_height;
    int     min_dst_width;
    int     min_dst_height;

    int     max_x_scale;
    int     max_y_scale;
    int     min_x_scale;
    int     min_y_scale;

    unsigned int    reserved[4];
} PgLayerCaps_t;

Description:

The PgLayerCaps_t structure describes the capabilities of a layer. To fill in this structure for a layer, call PgGetLayerCaps(). To set the capabilities, call PgSetLayerArg().

The members of the PgLayerCaps_t structure include:

format

The layer format that corresponds to the format index that you pass to PgGetLayerCaps(); one of:

Pg_LAYER_FORMAT_PAL8
Pg_LAYER_FORMAT_ARGB1555
Pg_LAYER_FORMAT_RGB565
Pg_LAYER_FORMAT_RGB888
Pg_LAYER_FORMAT_ARGB8888
Pg_LAYER_FORMAT_YUY2
Pg_LAYER_FORMAT_UYVY
Pg_LAYER_FORMAT_YVYU
Pg_LAYER_FORMAT_V422
Pg_LAYER_FORMAT_YVU9
Pg_LAYER_FORMAT_YV12
Pg_LAYER_FORMAT_YUV420

owner

The Photon client ID of the owner, if the surface is locked.

caps

General capabilities; a combination of the following:

Pg_LAYER_CAP_DISABLE -- the layer can be hidden.
Pg_LAYER_CAP_PAN_SOURCE -- the offset of the displayed image from the source image can be changed.
Pg_LAYER_CAP_PAN_DEST -- the layer's window on the screen can be moved.
Pg_LAYER_CAP_SIZE_DEST -- the layer's window on the screen can be resized.
Pg_LAYER_CAP_EDGE_CLAMP -- the last pixel of the source data can be replicated downwards/rightwards if the source viewport is scrolled past the bottom/right of the source data.
Pg_LAYER_CAP_EDGE_WRAP -- the source data can be wrapped from the top/left if the source viewport is scrolled past the bottom/right of the source data.
Pg_LAYER_CAP_SET_BRIGHTNESS -- the layer's brightness can be changed.
Pg_LAYER_CAP_SET_CONTRAST -- the layer's contrast can be changed.
Pg_LAYER_CAP_SET_SATURATION -- the layer's saturation can be changed.
Pg_LAYER_CAP_ALPHA_WITH_CHROMA -- this layer supports simultaneous alpha blending and chroma-keying.
Pg_LAYER_CAP_SCALE_REPLICATE -- scaling by pixel replication is supported.
Pg_LAYER_CAP_FILTER -- filtering is supported.
Pg_LAYER_CAP_MAIN_DISPLAY -- this layer is the screen's primary display. This layer's destination viewport is fixed to the physical screen size. This layer's format is fixed to the current video mode.

alpha_caps

Alpha capabilities. Only global and per-pixel alpha blending are currently supported. Alpha maps aren't supported for blending between layers.

Pg_LAYER_ALPHA_M1_SRC_PIXEL_ALPHA -- The primary alpha multiplier "M1" comes from the source pixels alpha component. Not valid if the source pixel format does not include an alpha component.
Pg_LAYER_ALPHA_M1_DST_PIXEL_ALPHA -- The primary alpha multiplier "M1" comes from the destination pixels alpha component Not valid if the destination pixel format does not include an alpha component.
Pg_LAYER_ALPHA_M1_GLOBAL -- The primary alpha multiplier "M1" comes from global multiplier 1.
Pg_LAYER_ALPHA_M2_SRC_PIXEL_ALPHA -- The secondary alpha multiplier "M2" comes from the source pixels alpha component. Not valid if the source pixel format does not include an alpha component.
Pg_LAYER_ALPHA_M2_DST_PIXEL_ALPHA -- The secondary alpha multiplier "M2" comes from the destination pixels alpha component Not valid if the destination pixel format does not include an alpha component.
Pg_LAYER_ALPHA_M2_GLOBAL -- The secondary alpha multiplier "M2" comes from global multiplier 2.
Pg_LAYER_BLEND_SRC_M1_ALPHA -- Specifies how Ms, the value that will be multiplied with the source pixel data to produce the resultant image, is derived. Ms = M1
Pg_LAYER_BLEND_SRC_ONE_MINUS_M1_ALPHA -- Specifies how Ms, the value that will be multiplied with the source pixel data to produce the resultant image, is derived. Ms = 1 - M1
Pg_LAYER_BLEND_SRC_M2_ALPHA -- Specifies how Ms, the value that will be multiplied with the source pixel data to produce the resultant image, is derived. Ms = M2
Pg_LAYER_BLEND_SRC_ONE_MINUS_M2_ALPHA -- Specifies how Ms, the value that will be multiplied with the source pixel data to produce the resultant image, is derived. Ms = 1 - M2
Pg_LAYER_BLEND_DEST_M1_ALPHA -- Specifies how Md, the value that will be multiplied with the destination pixel data to produce the resultant image, is derived. Md = M1
Pg_LAYER_BLEND_DEST_ONE_MINUS_M1_ALPHA -- Specifies how Md, the value that will be multiplied with the destination pixel data to produce the resultant image, is derived. Md = 1 - M1
Pg_LAYER_BLEND_DEST_M2_ALPHA -- Specifies how Md, the value that will be multiplied with the destination pixel data to produce the resultant image, is derived. Md = M2
Pg_LAYER_BLEND_DEST_ONE_MINUS_M2_ALPHA -- Specifies how Md, the value that will be multiplied with the destination pixel data to produce the resultant image, is derived. Md = 1 - M2

alpha_combine_caps

Alpha combine capabilities.

Pg_LAYER_ALPHA_COMBINE_CAP_SPP_WITH_DG -- source per-pixel alpha blending with destination global alpha multiplier supported.
Pg_LAYER_ALPHA_COMBINE_CAP_SG_WITH_DPP -- destination per-pixel alpha blending with source global alpha multiplier supported.
Pg_LAYER_ALPHA_COMBINE_CAP_SPP_WITH_DPP -- source per-pixel with alpha blending with destination per-pixel alpha blending supported.

chroma_caps

Chroma key capabilities:

Pg_LAYER_CHROMAKEY_CAP_SRC_SINGLE -- Chroma-keying based on an exact match between the source pixel value, and a single key color, is supported.
Pg_LAYER_CHROMAKEY_CAP_DST_SINGLE -- Chroma-keying based on an exact match between the destination pixel value, and a single key color, is supported.
Pg_LAYER_CHROMAKEY_CAP_SHOWTHROUGH -- Indicates that the layer can be configured so that when a chroma-key comparison is made, and the colors match, the displayed pixel will come from the layer(s) behind. If the colors do not match, the displayed pixel will come from this layer.
Pg_LAYER_CHROMAKEY_CAP_BLOCK -- Indicates that the layer can be configured so that when a chroma-key comparison is made, and the colors match, the displayed pixel will come from this layer. If the colors do not match, the pixel will come from the layer(s) behind.

max_data_width, max_data_height

The maximum size of a layer surface, in pixels.

max_src_width, max_src_height

The maximum size of the source viewport, in pixels.

max_dst_width, max_dst_height

The maximum size of the destination viewport, in pixels.

min_dst_width, min_dst_height

The minimum size of the destination viewport, in pixels.

max_x_scale

The maximum scaling factor for scaling up in the horizontal direction:

1 -- you can't scale up.
> 1 -- the width of the destination viewport can be up to max_x_scale times the width of the source viewport.

Values less than 1 are invalid.

max_y_scale

The maximum scaling factor for scaling up in the vertical direction:

1 -- you can't scale up.
> 1 -- the height of the destination viewport can be up to max_y_scale times the height of the source viewport.

Values less than 1 are invalid.

min_x_scale

The maximum scaling factor for scaling down in the horizontal direction:

1 -- you can't scale down.
> 1 -- the width of the source viewport can be up to min_x_scale times the width of the destination viewport.

Values less than 1 are invalid.

min_y_scale

The maximum scaling factor for scaling down in the vertical direction:

1 -- you can't scale down.
> 1 -- the height of the source viewport can be up to min_y_scale times the height of the destination viewport.

Values less than 1 are invalid.

Classification:

Photon

QNX Developer Support

`PgLayerCaps_t`

Synopsis:

Description:

Classification:

See also: