QNX Developer Support
Network RIP and router discovery routing daemon
|This daemon is available only in the Extended Networking Technology Development Kit (TDK).|
routed [-Adghmqstv] [-F net [/mask[,metric]]] [-P parms] [-T tracefile]
- Don't ignore RIPv2 authentication if we don't care about RIPv2 authentication. This option is required for conformance with RFC 1723. However, it makes no sense and breaks using RIP as a discovery protocol to ignore all RIPv2 packets that carry authentication when this machine doesn't care about authentication.
- Don't run in the background (for interactive use only).
- -F net[/mask][,metric]
- Minimize routes in transmissions via interfaces with addresses that match net/mask, and synthesizes a default route to this machine with the metric. The intent is to reduce RIP traffic on slow, point-to-point links such as PPP links by replacing many large UDP packets of RIP information with a single, small packet containing a "fake" default route. If metric is absent, a value of 14 is assumed to limit the spread of the "fake" default route. This is a dangerous feature that when used carelessly can cause routing loops. Notice also that more than one interface can match the specified network number and mask. See also -g.
- This option, which is used on internetwork routers to offer a route to the "default" destination,
is typically used on a gateway:
- to the Internet
- that uses another routing protocol whose routes aren't reported to other local routers.
It's equivalent to -F 0/0,1 and exists for historical reasons. Because a metric of 1 is used, it's very likely that you'll create chaos with a routing loop rather than solve your problem. We recommend that you use -P pm_rdisc on the command line, or add pm_rdisc to your /etc/gateways file. Because a larger metric is used, the likelihood of spreading a potentially dangerous default route is reduced.
- Don't advertise host or point-to-point routes, provided there's a network route going in the same direction. This option is a limited kind of aggregation, and is useful on gateways to Ethernets that have other gateway machines connected with point-to-point links (such as SLIP).
- Advertise a host or point-to-point route to a machine's primary interface. It's useful on multi-homed machines such as NFS servers, and should be used only when the cost of the host routes it generates is justified by the popularity of the server. Because there's more than one interface, it's effective only when the machine is supplying routing information. If specified with -q, the host route is advertised.
- -P parms
- Equivalent to adding the parms parameter line to /etc/gateways.
- Don't supply routing information (opposite of the -s option). The default if only one interface is present.
- Force routed to supply routing information. The default if more than one network interfaces are present and the TCP/IP stack is set to forward between interfaces (ipforwarding=1; see sysctl).
- -T tracefile
- Increase the debugging level to at least 1 and append debugging information to the trace file. Due to security concerns, it's not recommended that you routinely run routed when tracing is directed to a file.
- Increase the debugging level so that more information is logged to the tracefile specified with -T, or to standard output. The debugging level can be increased or decreased with the SIGUSR1 or SIGUSR2 signals or with rtquery.
- Display and log the version of the daemon.
- The name of file in which routed's actions are to be logged. This log contains information about any changes to the routing tables; if -t isn't specified to trace all packets, the log also maintains a history of recent messages sent and received that are related to the changed route.
Any other argument supplied is interpreted as the name of a file in which the actions of routed should be logged. It's better to use -T instead of appending the name of the trace file to the command.
The routed daemon is invoked at boot time to manage the network routing tables. It uses Routing Information Protocol (RIP), RIPv1 (RFC 1058), RIPv2 (RFC 1723), and Internet Router Discovery Protocol (RFC 1256) to maintain the kernel routing table. The RIPv1 protocol is based on the reference 4.3BSD daemon.
It listens on the UDP socket for the route service for Routing Information Protocol packets. It also sends and receives multicast Router Discovery ICMP messages. If the host is a router, routed periodically supplies copies of its routing tables to any directly connected hosts and networks. It also advertise or solicits default routes using Router Discovery ICMP messages.
When started (or when a network interface is later turned on), routed uses an AF_ROUTE address family facility to find those directly connected interfaces configured into the system and marked "up." It adds necessary routes for the interfaces to the kernel routing table. Soon after being first started, and provided there is at least one interface on which RIP hasn't been disabled, routed deletes all pre-existing non-static routes in kernel table. Static routes in the kernel table are preserved and included in RIP responses if they have a valid RIP metric.
If more than one interface is present (not counting the loopback interface), it is assumed that the host should forward packets among the connected networks. After transmitting a RIP request and Router Discovery Advertisements or Solicitations on a new interface, the daemon enters a loop, listening for RIP request and response and Router Discovery packets from other hosts.
When a request packet is received, routed formulates a reply based on the information maintained in its internal tables. The response packet generated contains a list of known routes, each marked with a "hop count" metric (a count of 16 or greater is considered "infinite"). Advertised metrics reflect the metric associated with interface (see ifconfig), so setting the metric on an interface is an effective way to steer traffic.
Responses don't include routes with a first hop on the requesting network to implement in part split-horizon. Requests from query programs such as rtquery are answered with the complete table.
The routing table maintained by the daemon includes space for several gateways for each destination to speed recovery from a failing router. RIP response packets received are used to update the routing tables provided they are from one of the several currently recognized gateways or advertise a better metric than at least one of the existing gateways.
When an update is applied, routed records the change in its own tables and updates the kernel routing table if the best route to the destination changes. The change in the kernel routing table is reflected in the next batch of response packets sent. If the next response isn't scheduled for a while, a flash update response containing only recently changed routes is sent.
In addition to processing incoming packets, routed also periodically checks the routing table entries. If an entry hasn't been updated for 3 minutes, the entry's metric is set to infinity and marked for deletion. Deletions are delayed until the route has been advertised with an infinite metric to insure the invalidation is propagated throughout the local internet. This is a form of poison reverse. Routes in the kernel table, that are added or changed as a result of ICMP redirect messages, are deleted after a while to minimize black-holes. When a TCP connection suffers a timeout, the kernel tells routed, which deletes all redirected routes through the gateway involved, advances the age of all RIP routes through the gateway to allow an alternate to be chosen, and advances of the age of any relevant Router Discovery Protocol default routes.
Hosts acting as internetwork routers gratuitously supply their routing tables every 30 seconds to all directly connected hosts and networks. These RIP responses are sent to the broadcast address on nets that support broadcasting, to the destination address on point-to-point links, and to the router's own address on other networks. If RIPv2 is enabled, multicast packets are sent on interfaces that support multicasting.
If no response is received on a remote interface, if there are errors while sending responses, or if there are more errors than input or output (see netstat), then the cable or some other part of the interface is assumed to be disconnected or broken, and routes are adjusted appropriately.
The Internet Router Discovery Protocol is handled similarly. When the daemon is supplying RIP routes, it also listens for Router Discovery Solicitations and sends Advertisements. When it is quiet and listening to other RIP routers, it sends Solicitations and listens for Advertisements. If it receives a good Advertisement and it's not multihomed, it stops listening for broadcast or multicast RIP responses. It tracks several advertising routers to speed recovery when the currently chosen router dies. If all discovered routers disappear, the daemon resumes listening to RIP responses. It continues listening to RIP while using Router Discovery if multihomed to ensure all interfaces are used.
The Router Discovery standard requires that advertisements have a default "lifetime" of 30 minutes. That means should something happen, a client can be without a good route for 30 minutes. It is a good idea to reduce the default to 45 seconds using
on the command line, or
in the /etc/gateways file.
While using Router Discovery (which happens by default when the system has a single network interface and a Router Discover Advertisement is received), there is a single default route and a variable number of redirected host routes in the kernel table. On a host with more than one network interface, this default route will be via only one of the interfaces. Thus, multi-homed hosts running with -q might need no_rdisc described below.
See the pm_rdisc facility described below to support "legacy" systems that can handle neither RIPv2 nor Router Discovery.
By default, neither Router Discovery advertisements nor solicitations are sent over point to point links (e.g. PPP). The netmask associated with point-to-point links (such as SLIP or PPP, with the IFF_POINTOPOINT flag) is used by routed to infer the netmask used by the remote system when RIPv1 is used.
The routed daemon supports the notion of "distant" passive or active gateways. When routed is started, it reads /etc/gateways to:
- find distant gateways which may not be located using only the information from a routing socket
- discover if some of the local gateways are passive
- obtain other parameters.
For more information, see the /etc/gateways file.
- List of the distant gateways which may not be located using only the information from a routing socket.
Internet Transport Protocols, XSIS 028112, Xerox System Integration Standard.