![]() |
![]() |
![]() |
![]() |
![]() |
This version of this document is no longer maintained. For the latest documentation, see http://www.qnx.com/developers/docs. |
Graphics driver for Fujitsu MB86292 graphics controller
io-graphics -d orchid [option[,option...]]
... &
x86, SH, PowerPC
For the general io-graphics options that can be used with this driver, see io-graphics.
Options specific to this driver:
The devg-orchid.so driver provides accelerated 2D support for the Fujitsu MB86292 graphics controller.
You can edit the orchid.conf configuration file to enable devg-orchid.so to run on your board. Follow the editing instructions in this file to specify the correct configuration for the required display mode. (For a more detailed explanation of the display settings, see the appropriate Fujitsu documentation.)
You must specify the location of the configuration file to the devg-orchid.so driver via the mode_opts option of io-graphics For example:
io-graphics -d orchid xres=640,yres=480,bitpp=15,photon, mode_opts=/etc/photon/config/orchid.conf
| Feature | Provision |
|---|---|
| Solid fills | Yes |
| Bresenham lines | Yes |
| Pattern fills | Yes |
| Polygons | Yes |
| Onscreen blitting | Yes |
| Offscreen blitting | Yes |
| Chroma-keyed blitting | Yes |
| Alpha blending | No |
| Raster OP's | Partial |
| Bitmaps | Yes |
| Feature | Provision |
|---|---|
| YUV formats | Yes |
| RGB formats | Yes |
| Up scaling | No |
| Down scaling | Not supported for RGB formats |
| Feature | Provision |
|---|---|
| Hardware Cursor | Yes |
| TV Out | No |
| Video capture | Yes |
| DPMS (power saving) | Yes |
| Layers supported | 4 |
| Display size (pixels): | Refresh rate(Hz): | Color depth (bits per pixel): |
|---|---|---|
| 640x480 | 60 | 8, 15 |
| 800x600 | 60 | 8, 15 |
| 1024x768 | 60 | 8, 15 |
Restrictions:
This driver needs the following files available at run time:
io-graphics, crttrap, devgt-iographics, orchid.conf
![]() |
![]() |
![]() |
![]() |